Need echo turned off on async lines.

[oicu812]

All,

Okay, I admit I’m stumped on this one. I need the echo turned off on one of the 2512 async lines. I need this because it plugs into the console port of a 3640. When I’m not using a telnet connection to the 3640 the async lines echo everything back to the 3640. The 3640 then tries to process the echo as a command and things go down hill from there. Any way to keep the async lines on the 2512 from echoing what it receives?

Thanks in advance.

[mchin345 · Accepted solution]

You have to use the command "no exec" in the line mode.

[oicu812]

Excellent, that fixed the problem. Even rebooting the router and with all its output didn’t even lock up the line. Thanks again!