cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
274
Views
0
Helpful
4
Replies

NetBios session doesn't established

borisov_alexey
Beginner
Beginner

Hi !

We have moved server from one network to another, and want the client in old network can access server in new net using the ip address of the server in the old network, (like in the Using NAT During a Network Transition from

http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml)

I can ping and trace the server in the new net from the old net, using the old ip address of the server.

But when I try to map network drive from the old net through

net use s: \\old ip\share,

I receive message "network path not found"

4 Replies 4

pciaccio
Enthusiast
Enthusiast

on the gateway router interfaces place either of the following commands:

ip helper-address xx.xx.xx.xx (IP address of the renmote server).

ip forward-protocol udp (This forwards UDP packets past your router.)

Try these out....

Thanks. I placed this commands, but this doesn't solve the problem

Do you have any access-lists between these two servers? Can you send a configuration of the router or routers in between the servers.That would be more helpful...Thanks...