Hello all,
I know that this should be a straight forward thing, but there is some very bizzare behavior going on with a couple of 2600's that I am trying to get MPP working properly. Both routers are identical.
BTW - If I just use straight PPP, everything is beautiful.
Router A can't do TCP to router B, however, Router B can TCP to Router A.
I can ICMP to both of them. Router is driectly connected to the Internet & router B is at a remote location.
Router A Config:
Building configuration...
Current configuration:
!
version 12.0
service config
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname !
enable secret
enable password wordpass
!
!
!
!
!
ip subnet-zero
!
no ip bootp server
!
!
!
process-max-time 200
!
interface Multilink1
ip address 192.168.1.17 255.255.255.240
no ip directed-broadcast
no cdp enable
ppp multilink
multilink load-threshold 2 either
multilink-group 1
!
interface Ethernet0/0
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
no cdp enable
!
interface Serial0/0
no ip address
ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
service-module t1 clock source internal
ppp multilink
multilink-group 1
!
interface Serial0/1
no ip address
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
service-module t1 clock source internal
ppp multilink
multilink-group 1
!
interface FastEthernet1/0
ip address 209.17.93.17 255.255.255.240 secondary
ip address 209.17.95.129 255.255.255.0
no ip directed-broadcast
no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 209.17.95.1
ip route 209.17.93.32 255.255.255.240 Multilink1
ip route 209.17.95.144 255.255.255.240 Multilink1
no ip http server
!
snmp-server community public RO
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
password login
!
!
no scheduler allocate
end
Router B
Building configuration...
Current configuration:
!
version 12.0
service config
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname !
enable secret
enable password wordpass
!
!
!
!
!
ip subnet-zero
!
no ip bootp server
!
!
!
process-max-time 200
!
interface Multilink1
ip address 192.168.1.33 255.255.255.240
ip directed-broadcast
ip nat outside
no cdp enable
ppp multilink
multilink load-threshold 2 either
multilink-group 1
!
interface Serial0/0
ip unnumbered Multilink1
ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
!
interface Serial0/1
ip unnumbered Multilink1
ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
!
interface FastEthernet1/0
ip address 209.17.93.17 255.255.255.240 secondary
ip address 209.17.95.129 255.255.255.0
no ip directed-broadcast
no cdp enable
!
ip route 0.0.0.0 0.0.0.0 Multilink 1
Any clues to what I am doing wrong would be helpful.
Thansk
Rod
