Hi,
since upgrading our 6509's to CATOS 7.6(3a)( on MSFC 12.1(12c)E4 ) I have no outputs on "sh mls entr ip dest/sour" with flow-mask "full". When changing to mask "destination" or "dest-source" I see the outputs! Our SUPs are having 64 DRAM, could it be that I cannot run 7.6(3a) with flow-mask "full" in combination with 64 dram? Is an upgrade to 128 (MEM-S1-128MB=) necessary? Here is the utilization output "sh proc mem":
Memory Pool Utilization
Memory Pool Type 1Min 5Min 10Min
---------------- ----- ----- -----
DRAM 73% 73% 73%
FLASH 66% 66% 66%
NVRAM 64% 64% 64%
MBUF 11% 11% 11%
CLUSTER 26% 26% 26%
MALLOC 47% 47% 47%
Many thanks
Patrick