07-20-2014 07:32 PM - edited 03-03-2019 07:31 AM
Hi Sir/Ma'am,
Hope someone can help me... My problem is that I added new ip block to my bgp to advertise. I have to cisco routers by the way... Both have same configuration but the other one is not advertising my newly added ip block...
I did use "prefix list" and "suppress-map" on my config...
if you need my config please tell me should i put here... Thank you in advance
Solved! Go to Solution.
07-22-2014 02:46 AM
I do see
Implicit Withdraw: 12
only thing i do see from your configuration missing is for Route-map
match list to be updated as below
ip prefix-list RadiusPathPrepend seq 150 permit 43.247.6.0/24
ip prefix-list RadiusPathPrepend seq 200 permit 43.247.7.0/24
ip prefix-list RadiusPathPrepend seq 250 permit 43.247.8.0/24
ip prefix-list RadiusPathPrepend seq 300 permit 43.247.9.0/24
Kindly update it should work for you now
HTH
Sandy
07-20-2014 07:52 PM
My first question is whether there is an entry in your ip routing table that matches the new block that you ask BGP to advertise. If the answer to this is yes then I ask that you post the BGP configuration and also to post the output of show ip route from the router.
HTH
Rick
07-20-2014 08:06 PM
Hi Richard,
Here's the config on both router... I just changed some value to X for some reason...
Thanks...
router ospf 1903
log-adjacency-changes
redistribute connected subnets
redistribute static subnets route-map Fiber-Null
network 103.x.x.x 0.0.0.15 area 0
network 103.x.x.x 0.0.0.31 area 0
network 103.x.x.x 0.0.0.15 area 0
default-information originate always metric 10
!
router bgp 593xx
no bgp fast-external-fallover
no bgp log-neighbor-changes
bgp maxas-limit 50
neighbor Fiber-internal peer-group
neighbor Fiber-internal remote-as 593xx
neighbor Fiber-internal description Fiber internal BGP peers
neighbor Fiber-internal password 7 121F441541190F5427
neighbor Fiber-internal update-source Loopback0
neighbor 103.x.x.x remote-as 55821
neighbor 103.x.x.x description Y
neighbor 103.x.x.x version 4
neighbor 103.x.x.x peer-group Fiber-internal
neighbor 103.x.x.x description IBGP-Fiber-NPEG-2
neighbor 103.x.x.x remote-as 593xx
neighbor 103.x.x.x description ZStaff
neighbor 103.x.x.x version 4
neighbor 121.x.x.x33 remote-as 17639
neighbor 121.x.x.x33 description X
neighbor 121.x.x.x33 version 4
!
address-family ipv4
neighbor 103.x.x.x activate
neighbor 103.x.x.x soft-reconfiguration inbound
neighbor 103.x.x.x prefix-list FiberSpecific-Y out
neighbor 103.x.x.x route-map YLocalPref in
neighbor 103.x.x.x route-map YPathPrepend out
neighbor 103.x.x.x filter-list 55 in
neighbor 103.x.x.x filter-list 10 out
neighbor 103.x.x.x activate
neighbor 103.x.x.x activate
neighbor 103.x.x.x send-community
neighbor 103.x.x.x default-originate
neighbor 103.x.x.x prefix-list ZStaff-prefix in
neighbor 103.x.x.x route-map ZStaffLocalPref in
neighbor 103.x.x.x maximum-prefix 5
neighbor 103.x.x.x filter-list 80 out
neighbor 121.x.x.x33 activate
neighbor 121.x.x.x33 soft-reconfiguration inbound
neighbor 121.x.x.x33 prefix-list FiberSpecific-X out
neighbor 121.x.x.x33 route-map XLocalPref in
neighbor 121.x.x.x33 route-map XPathPrepend out
neighbor 121.x.x.x33 filter-list 50 in
neighbor 121.x.x.x33 filter-list 10 out
no auto-summary
no synchronization
network 43.24x.x.x mask 255.255.252.0
network 43.24x.x.x mask 255.255.255.0
network 43.24x.x.x mask 255.255.255.0
network 43.24x.x.x mask 255.255.255.0
network 43.24x.x.x mask 255.255.255.0
network 103.x.x.x mask 255.255.255.0
network 103.x.x.x mask 255.255.255.0
network 103.x.x.x mask 255.255.255.0
aggregate-address 43.24x.x.x 255.255.252.0 suppress-map SuppressMap43.24x.x.x
aggregate-address 103.x.x.x 255.255.252.0 suppress-map SuppressMap103.x.x.x
exit-address-family
!
ip classless
ip route 43.24x.x.x 255.255.252.0 Null0 tag 777
ip route 43.24x.x.x 255.255.255.0 Null0 tag 777
ip route 43.24x.x.x 255.255.255.0 Null0 tag 777
ip route 43.24x.x.x 255.255.255.0 Null0 tag 777
ip route 43.24x.x.x 255.255.255.0 Null0 tag 777
ip route 103.x.x.x 255.255.255.0 Null0 tag 777
ip route 103.x.x.x 255.255.255.0 Null0 tag 777
ip route 103.x.x.x 255.255.255.0 Null0 tag 777
ip route 103.x.x.x 255.255.255.240 103.2x.x.x
no ip http server
!
ip as-path access-list 10 permit ^$
ip as-path access-list 10 permit ^(593xx_)+$
ip as-path access-list 50 permit .*
ip as-path access-list 51 permit ^17639_[0-9]*$
ip as-path access-list 55 permit .*
ip as-path access-list 56 permit ^55821_[0-9]*$
ip as-path access-list 80 permit ^$
!
!
ip prefix-list AllowSpecific-103.x.x.x description allow /22
ip prefix-list AllowSpecific-103.x.x.x seq 10 deny 103.x.x.x/24
ip prefix-list AllowSpecific-103.x.x.x seq 15 deny 103.x.x.x/24
ip prefix-list AllowSpecific-103.x.x.x seq 20 deny 103.x.x.x/24
ip prefix-list AllowSpecific-103.x.x.x seq 25 deny 103.x.x.x/24
ip prefix-list AllowSpecific-103.x.x.x seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list AllowSpecific-43.24x.x.x description allow /22
ip prefix-list AllowSpecific-43.24x.x.x seq 10 deny 43.24x.x.x/24
ip prefix-list AllowSpecific-43.24x.x.x seq 15 deny 43.24x.x.x/24
ip prefix-list AllowSpecific-43.24x.x.x seq 20 deny 43.24x.x.x/24
ip prefix-list AllowSpecific-43.24x.x.x seq 25 deny 43.24x.x.x/24
ip prefix-list AllowSpecific-43.24x.x.x seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list XPathPrepend description yun na
ip prefix-list XPathPrepend seq 10 permit 103.x.x.x/24
ip prefix-list XPathPrepend seq 20 permit 103.x.x.x/24
ip prefix-list XPathPrepend seq 30 permit 103.x.x.x/24
ip prefix-list XPathPrepend seq 100 deny 0.0.0.0/0 le 32
!
ip prefix-list Fiber-Null description list of pull up routes
ip prefix-list Fiber-Null seq 5 deny 103.x.x.x/22
ip prefix-list Fiber-Null seq 6 deny 43.24x.x.x/22
ip prefix-list Fiber-Null seq 10 permit 0.0.0.0/0 le 32
!
ip prefix-list FiberSpecific-X description Prefix Advertise to X
ip prefix-list FiberSpecific-X seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list FiberSpecific-Y seq 10 deny 103.x.x.x/24
ip prefix-list FiberSpecific-Y seq 20 deny 103.x.x.x/24
ip prefix-list FiberSpecific-Y seq 30 deny 103.x.x.x/24
ip prefix-list FiberSpecific-Y seq 40 deny 103.x.x.x/24
ip prefix-list FiberSpecific-Y seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list ZStaff-prefix description ZStaff prefixes
ip prefix-list ZStaff-prefix seq 5 permit 103.x.x.x/24
ip prefix-list ZStaff-prefix seq 100 deny 0.0.0.0/0 le 32
access-list 99 permit 103.x.x.x
access-list 99 permit 103.x.x.x 0.0.0.255
access-list 99 permit 103.x.x.x 0.0.0.255
access-list 99 permit 103.x.x.x 0.0.0.255
access-list 99 permit 103.x.x.x 0.0.0.255
access-list 110 permit ip host 61.9.0.41 any
access-list 110 deny ip any any
!
route-map ZStaffLocalPref permit 10
match ip address prefix-list ZStaff-prefix
set local-preference 210
!
route-map ZStaffLocalPref permit 20
route-map SuppressMap43.24x.x.x permit 10
match ip address prefix-list AllowSpecific-43.24x.x.x
!
route-map XPathPrepend permit 10
match ip address prefix-list XPathPrepend
set as-path prepend 59322
!
route-map XPathPrepend permit 20
!
route-map Fiber-Null deny 10
match tag 777
!
route-map Fiber-Null permit 20
!
route-map YLocalPref permit 10
match as-path 56
set local-preference 202
!
route-map YLocalPref permit 20
!
route-map XLocalPref permit 10
match as-path 51
set local-preference 202
!
route-map XLocalPref permit 20
!
route-map SuppressMap103.x.x.x permit 10
match ip address prefix-list AllowSpecific-103.x.x.x
07-20-2014 08:12 PM
sh ip bgp neighbors 103.x.x.209 advertised-routes
BGP table version is 267057656, local router ID is 103.x.x.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 103.x.x.0/24 0.0.0.0 0 32768 i
*> 103.x.x.0/24 0.0.0.0 0 32768 i
*> 103.x.x.0/24 0.0.0.0 0 32768 i
The 103.x.x.0/24 block is advertising but not the 43.24x.x.x/24 block
07-21-2014 08:17 AM
The information that you provide here is not useful to understand the problem. Your most recent post seems to reference a particular neighbor with whom you have this problem. But your conversion of the configuration details to 103.x.x.x prevents me from knowing which of the neighbors in the config is the one that has the problem.
HTH
Rick
07-21-2014 08:07 PM
Sorry if I did change the ip address to x.x.x for security purpose... The scenario was:
I have bgp peering with AS55821 and successfully advertising the ip block 103.225.x.x/22 . All was working properly. And then we want to add another ip block which is 43.247.x.x to the same bgp peering (AS55821). The configuration of both ip blocks are the same but it's not working...
Here's my actual configuration:
router ospf 1903
log-adjacency-changes
redistribute connected subnets
redistribute static subnets route-map Fiber-Null
network 103.225.6.0 0.0.0.15 area 0
network 103.225.7.0 0.0.0.31 area 0
default-information originate always metric 1
!
router bgp 5922
no bgp log-neighbor-changes
bgp maxas-limit 50
neighbor Fiber-internal peer-group
neighbor Fiber-internal remote-as 5922
neighbor Fiber-internal description Fiber internal BGP peers
neighbor Fiber-internal password 7 03021A09551D221C43
neighbor Fiber-internal update-source Loopback0
neighbor 103.16.17.209 remote-as 55821
neighbor 103.16.17.209 description Radius
neighbor 103.16.17.209 version 4
neighbor 103.225.6.1 peer-group Fiber-internal
neighbor 103.225.6.1 description IBGP-Fiber-NPEG-1
neighbor 121.58.19.33 remote-as 17639
neighbor 121.58.19.33 description Comclark
neighbor 121.58.19.33 version 4
!
address-family ipv4
neighbor 103.16.17.209 activate
neighbor 103.16.17.209 soft-reconfiguration inbound
neighbor 103.16.17.209 prefix-list FiberSpecific-Radius out
neighbor 103.16.17.209 route-map RadiusLocalPref in
neighbor 103.16.17.209 route-map RadiusPathPrepend out
neighbor 103.16.17.209 filter-list 55 in
neighbor 103.16.17.209 filter-list 10 out
neighbor 103.225.6.1 activate
neighbor 121.58.19.33 activate
neighbor 121.58.19.33 soft-reconfiguration inbound
neighbor 121.58.19.33 prefix-list FiberSpecific-Comclark out
neighbor 121.58.19.33 route-map ComclarkLocalPref in
neighbor 121.58.19.33 route-map ComclarkPathPrepend out
neighbor 121.58.19.33 filter-list 50 in
neighbor 121.58.19.33 filter-list 10 out
no auto-summary
no synchronization
network 43.247.6.0 mask 255.255.252.0
network 43.247.6.0 mask 255.255.255.0
network 43.247.7.0 mask 255.255.255.0
network 43.247.8.0 mask 255.255.255.0
network 43.247.9.0 mask 255.255.255.0
network 103.225.6.0 mask 255.255.252.0
network 103.225.6.0 mask 255.255.255.0
network 103.225.7.0 mask 255.255.255.0
network 103.225.9.0 mask 255.255.255.0
aggregate-address 43.247.6.0 255.255.252.0 suppress-map SuppressMap43.247.6.0
aggregate-address 103.225.6.0 255.255.252.0 suppress-map SuppressMap103.225.6.0
exit-address-family
ip classless
ip route 43.247.6.0 255.255.252.0 Null0 tag 777
ip route 43.247.6.0 255.255.255.0 Null0 tag 777
ip route 43.247.7.0 255.255.255.0 Null0 tag 777
ip route 43.247.8.0 255.255.255.0 Null0 tag 777
ip route 43.247.9.0 255.255.255.0 Null0 tag 777
ip route 103.225.6.0 255.255.252.0 Null0 tag 777
ip route 103.225.6.0 255.255.255.0 Null0 tag 777
ip route 103.225.7.0 255.255.255.0 Null0 tag 777
ip route 103.225.9.0 255.255.255.0 Null0 tag 777
no ip http server
!
ip as-path access-list 10 permit ^$
ip as-path access-list 10 permit ^(59334_)+$
ip as-path access-list 50 permit .*
ip as-path access-list 51 permit ^17639_[0-9]*$
ip as-path access-list 55 permit .*
ip as-path access-list 56 permit ^55821_[0-9]*$
ip as-path access-list 56 permit _4134$
ip as-path access-list 56 permit _23456$
ip as-path access-list 56 permit _3491$
!
!
ip prefix-list AllowSpecific-103.225.6.0 description allow /22
ip prefix-list AllowSpecific-103.225.6.0 seq 10 deny 103.225.6.0/24
ip prefix-list AllowSpecific-103.225.6.0 seq 15 deny 103.225.7.0/24
ip prefix-list AllowSpecific-103.225.6.0 seq 20 deny 103.225.8.0/24
ip prefix-list AllowSpecific-103.225.6.0 seq 25 deny 103.225.9.0/24
ip prefix-list AllowSpecific-103.225.6.0 seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list AllowSpecific-43.247.6.0 description allow /22
ip prefix-list AllowSpecific-43.247.6.0 seq 10 deny 43.247.6.0/24
ip prefix-list AllowSpecific-43.247.6.0 seq 15 deny 43.247.7.0/24
ip prefix-list AllowSpecific-43.247.6.0 seq 20 deny 43.247.8.0/24
ip prefix-list AllowSpecific-43.247.6.0 seq 25 deny 43.247.9.0/24
ip prefix-list AllowSpecific-43.247.6.0 seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list Fiber-Null description list of pull up routes
ip prefix-list Fiber-Null seq 5 deny 103.225.6.0/22
ip prefix-list Fiber-Null seq 6 deny 43.247.6.0/22
ip prefix-list Fiber-Null seq 10 permit 0.0.0.0/0 le 32
!
ip prefix-list FiberSpecific-Comclark seq 10 deny 103.225.6.0/24
ip prefix-list FiberSpecific-Comclark seq 15 deny 103.225.7.0/24
ip prefix-list FiberSpecific-Comclark seq 20 deny 103.225.8.0/24
ip prefix-list FiberSpecific-Comclark seq 25 deny 103.225.9.0/24
ip prefix-list FiberSpecific-Comclark seq 100 permit 0.0.0.0/0 le 32
!
ip prefix-list FiberSpecific-Radius description Prefix Advertise to Radius
ip prefix-list FiberSpecific-Radius seq 100 permit 0.0.0.0/0 le 32
ip prefix-list RadiusPathPrepend description yun na
ip prefix-list RadiusPathPrepend seq 50 permit 103.225.9.0/24
ip prefix-list RadiusPathPrepend seq 100 deny 0.0.0.0/0 le 32
!
ip prefix-list RadiusPathPrepend-2 description yun na
ip prefix-list RadiusPathPrepend-2 seq 50 permit 103.225.6.0/24
ip prefix-list RadiusPathPrepend-2 seq 60 permit 103.225.7.0/24
ip prefix-list RadiusPathPrepend-2 seq 100 deny 0.0.0.0/0 le 32
access-list 99 permit 103.16.17.210
access-list 99 permit 103.225.6.0 0.0.0.255
access-list 99 permit 103.225.7.0 0.0.0.255
access-list 99 permit 103.225.8.0 0.0.0.255
access-list 99 permit 103.225.9.0 0.0.0.255
access-list 110 permit ip host 61.9.101.1 any
access-list 110 deny ip any any
!
route-map ComclarkPthPrepend permit 10
!
route-map SuppressMap43.247.6.0 permit 10
match ip address prefix-list AllowSpecific-43.247.6.0
!
route-map Fiber-Null deny 10
match tag 777
!
route-map Fiber-Null permit 20
!
route-map RadiusPathPrepend permit 10
match ip address prefix-list RadiusPathPrepend
!
route-map RadiusPathPrepend permit 20
match ip address prefix-list RadiusPathPrepend-2
set as-path prepend 5922
!
route-map RadiusLocalPref permit 10
match as-path 56
set local-preference 205
!
route-map RadiusLocalPref permit 20
!
route-map ComclarkLocalPref permit 10
match as-path 51
set local-preference 202
!
route-map ComclarkLocalPref permit 20
!
route-map SuppressMap103.225.6.0 permit 10
match ip address prefix-list AllowSpecific-103.225.6.0
07-21-2014 09:14 PM
Hi ,
Can you share me following output
1) show ip ospf database
2) show ip bgp
3) show ip bgp neigbhor 103.16.17.209
4) show ip bgp filter-list 10
5) show ip bgp rib-failure
Suspecting problem on network reach ability for your new network statement . configure below statement without tag
ip route 43.247.6.0 255.255.252.0 Null0 tag 777
ip route 43.247.6.0 255.255.255.0 Null0 tag 777
ip route 43.247.7.0 255.255.255.0 Null0 tag 777
ip route 43.247.8.0 255.255.255.0 Null0 tag 777
ip route 43.247.9.0 255.255.255.0 Null0 tag 777
HTH
Sandy
07-21-2014 10:02 PM
Hi,
Below are the results for the following commands:
sh ip ospf database
OSPF Router with ID (103.225.6.2) (Process ID 1903)
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link count
103.225.6.1 103.225.6.1 1363 0x8000160D 0x00F644 3
103.225.6.2 103.225.6.2 1092 0x80000026 0x00B913 2
103.225.6.3 103.225.6.3 985 0x80001609 0x0019B5 2
Net Link States (Area 0)
Link ID ADV Router Age Seq# Checksum
103.225.7.1 103.225.6.1 1363 0x80000025 0x006C98
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
0.0.0.0 103.225.6.1 320 0x80001607 0x00CDDB 1903
0.0.0.0 103.225.6.2 1092 0x80001603 0x007540 1903
103.16.17.208 103.225.6.2 1092 0x80001603 0x003EEE 0
103.225.6.16 103.225.6.1 320 0x800003E4 0x0003D9 0
103.225.6.32 103.225.6.1 320 0x800003E4 0x00626A 0
103.225.6.48 103.225.6.1 320 0x800003E4 0x00C1FA 0
103.225.6.64 103.225.6.1 578 0x80000006 0x00186E 0
103.225.6.224 103.225.6.1 323 0x800003E4 0x00DA31 0
103.225.7.160 103.225.6.1 323 0x800003E4 0x00F169 0
103.225.7.208 103.225.6.1 323 0x800003E4 0x00B856 0
103.225.7.212 103.225.6.1 323 0x800003E4 0x00907A 0
103.225.7.216 103.225.6.1 323 0x800003E4 0x00689E 0
103.225.7.220 103.225.6.1 323 0x80000334 0x00A112 0
103.225.7.240 103.225.6.1 323 0x800003E4 0x005F93 0
103.225.7.252 103.225.6.1 323 0x800003E4 0x00FEE3 0
103.225.9.0 103.225.6.1 323 0x800003E4 0x0022D7 0
103.225.9.48 103.225.6.1 323 0x800004B9 0x00F3EF 0
103.225.9.240 103.225.6.1 323 0x800003E4 0x0049A7 0
121.58.194.32 103.225.6.1 323 0x800010FB 0x005D3A 0
175.158.106.56 103.225.6.2 1094 0x800001D8 0x005A0D 0
202.176.199.133 103.225.6.2 1094 0x80001374 0x00AB36 0
===================
show ip bgp neig 103.16.17.209
BGP neighbor is 103.16.17.209, remote AS 55821, external link
Description: Radius
BGP version 4, remote router ID 103.16.169.186
BGP state = Established, up for 19:50:10
Last read 00:00:19, hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received(old & new)
Address family IPv4 Unicast: advertised and received
Message statistics:
InQ depth is 0
OutQ depth is 0
Sent Rcvd
Opens: 1 1
Notifications: 0 0
Updates: 8 391986
Keepalives: 1193 2
Route Refresh: 0 0
Total: 1202 391989
Default minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP table version 2385077, neighbor version 2385077
Index 2, Offset 0, Mask 0x4
Inbound soft reconfiguration allowed
Inbound path policy configured
Outbound path policy configured
Outgoing update prefix filter list is FiberSpecific-Radius
Incoming update AS path filter list is 55
Outgoing update AS path filter list is 10
Route map for incoming advertisements is RadiusLocalPref
Route map for outgoing advertisements is RadiusPathPrepend
Sent Rcvd
Prefix activity: ---- ----
Prefixes Current: 3 508098 (Consumes 25423200 bytes)
Prefixes Total: 12 1926191
Implicit Withdraw: 9 1394168
Explicit Withdraw: 0 23925
Used as bestpath: n/a 436896
Used as multipath: n/a 0
Saved (soft-reconfig): n/a 21552 (Consumes 1034496 bytes)
Outbound Inbound
Local Policy Denied Prefixes: -------- -------
route-map: 17 0
filter-list: 654351 0
prefix-list 6 0
Suppressed duplicate: 0 128126
AS_PATH loop: n/a 7
Bestpath from this peer: 2954215 n/a
Suppressed due to dampening: 20 n/a
Total: 3608609 128133
Number of NLRIs in the update sent: max 2, min 0
Connections established 1; dropped 0
Last reset never
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 103.16.17.210, Local port: 179
Foreign host: 103.16.17.209, Foreign port: 13799
Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes)
Event Timers (current time is 0x44202F0):
Timer Starts Wakeups Next
Retrans 1198 1 0x0
TimeWait 0 0 0x0
AckHold 12426 1827 0x0
SendWnd 0 0 0x0
KeepAlive 1 0 0x0
GiveUp 0 0 0x0
PmtuAger 0 0 0x0
DeadWait 0 0 0x0
iss: 786668411 snduna: 786691564 sndnxt: 786691564 sndwnd: 31628
irs: 3197216748 rcvnxt: 3227471037 rcvwnd: 16032 delrcvwnd: 352
SRTT: 300 ms, RTTO: 303 ms, RTV: 3 ms, KRTT: 0 ms
minRTT: 0 ms, maxRTT: 404 ms, ACK hold: 200 ms
Flags: passive open, nagle, gen tcbs
Datagrams (max data segment is 1460 bytes):
Rcvd: 23071 (out of order: 6), with data: 21886, total data bytes: 30254288
Sent: 22548 (retransmit: 1, fastretransmit: 0), with data: 1196, total data bytes: 23152
======================
show ip bgp filter-list 10
BGP table version is 2386911, local router ID is 103.225.6.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
s> 43.247.6.0/24 0.0.0.0 0 32768 i
s i 103.225.6.1 0 100 0 i
*> 43.247.6.0/22 0.0.0.0 0 32768 i
* 0.0.0.0 32768 i
* i 103.225.6.1 0 100 0 i
s> 43.247.7.0/24 0.0.0.0 0 32768 i
s i 103.225.6.1 0 100 0 i
s> 43.247.8.0/24 0.0.0.0 0 32768 i
s i 103.225.6.1 0 100 0 i
s> 43.247.9.0/24 0.0.0.0 0 32768 i
s i 103.225.6.1 0 100 0 i
* i103.225.6.0/24 103.225.6.1 0 100 0 i
*> 0.0.0.0 0 32768 i
*> 103.225.6.0/22 0.0.0.0 32768 i
* i 103.225.6.1 0 100 0 i
* i103.225.7.0/24 103.225.6.1 0 100 0 i
*> 0.0.0.0 0 32768 i
*>i103.225.8.0/24 103.225.7.218 0 210 0 59334 i
* i103.225.9.0/24 103.225.6.1 0 100 0 i
*> 0.0.0.0 0 32768 i
=======================
show ip bgp rib-failure
Network Next Hop RIB-failure RIB-NH Matches
07-21-2014 11:31 PM
Hi ,
Remove tag from your Null 0 and try to advertise . And let me with show ip bgp
table
no ip route 43.247.6.0 255.255.252.0 Null0 tag 777
no ip route 43.247.6.0 255.255.255.0 Null0 tag 777
no ip route 43.247.7.0 255.255.255.0 Null0 tag 777
no ip route 43.247.8.0 255.255.255.0 Null0 tag 777
no ip route 43.247.9.0 255.255.255.0 Null0 tag 777
ip route 43.247.6.0 255.255.252.0 Null0
ip route 43.247.6.0 255.255.255.0 Null0
ip route 43.247.7.0 255.255.255.0 Null0
ip route 43.247.8.0 255.255.255.0 Null0
ip route 43.247.9.0 255.255.255.0 Null0
HTH
Sandy
07-21-2014 11:40 PM
Hi Sir,
I did remove the following tag but still nothing happens... :(
sh ip bgp | include 43.247.6.0
*> 43.247.6.0/24 0.0.0.0 0 32768 i
*> 43.247.6.0/22 0.0.0.0 0 32768 i
#sh ip bgp | include 43.247.7.0
*> 43.247.7.0/24 0.0.0.0 0 32768 i
#sh ip bgp | include 43.247.8.0
*> 43.247.8.0/24 0.0.0.0 0 32768 i
#sh ip bgp | include 43.247.9.0
*> 43.247.9.0/24 0.0.0.0 0 32768 i
07-22-2014 12:28 AM
Hi ,
Can you join this webex meetings for online support
https://meetings.webex.com/collabs/meetings/join?uuid=MEFV59M1BOK2CMKNYQ4ZRVO1YI-512H
07-22-2014 12:35 AM
Hi Sir,
My browser doesn't support java right now... That's why I am not able to connect to your invitation...
07-22-2014 01:22 AM
Okay , I have opened the meeting , you can join whenever u want
Please share me below outputs again
sh ip bgp neighbors 103.x.x.209 advertised-routes
show ip bgp neig 103.16.17.209
show ip bgp filter-list 10
HTH
Sandy
07-22-2014 01:28 AM
Hi Sir,
here's result:
sh ip bgp neighbors 103.16.17.209 advertised-routes
BGP table version is 2870893, local router ID is 103.225.6.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 103.225.6.0/24 0.0.0.0 0 32768 i
*> 103.225.7.0/24 0.0.0.0 0 32768 i
*> 103.225.9.0/24 0.0.0.0 0 32768 i
=============
sh ip bgp neighbors 103.16.17.209
BGP neighbor is 103.16.17.209, remote AS 55821, external link
Description: Radius
BGP version 4, remote router ID 103.16.169.186
BGP state = Established, up for 23:17:59
Last read 00:00:00, hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received(old & new)
Address family IPv4 Unicast: advertised and received
Message statistics:
InQ depth is 23
OutQ depth is 0
Sent Rcvd
Opens: 1 1
Notifications: 0 0
Updates: 10 475031
Keepalives: 1400 2
Route Refresh: 0 0
Total: 1411 475034
Default minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP table version 2871222, neighbor version 2871142
Index 2, Offset 0, Mask 0x4
Inbound soft reconfiguration allowed
Inbound path policy configured
Outbound path policy configured
Outgoing update prefix filter list is FiberSpecific-Radius
Incoming update AS path filter list is 55
Outgoing update AS path filter list is 10
Route map for incoming advertisements is RadiusLocalPref
Route map for outgoing advertisements is RadiusPathPrepend
Sent Rcvd
Prefix activity: ---- ----
Prefixes Current: 3 508129 (Consumes 25423296 bytes)
Prefixes Total: 15 2314001
Implicit Withdraw: 12 1771630
Explicit Withdraw: 0 34242
Used as bestpath: n/a 435652
Used as multipath: n/a 0
Saved (soft-reconfig): n/a 21531 (Consumes 1033488 bytes)
Outbound Inbound
Local Policy Denied Prefixes: -------- -------
route-map: 28 0
filter-list: 820355 0
prefix-list 20 0
Suppressed duplicate: 0 157471
AS_PATH loop: n/a 7
Bestpath from this peer: 3714868 n/a
Suppressed due to dampening: 20 n/a
Total: 4535291 157478
Number of NLRIs in the update sent: max 2, min 0
Connections established 1; dropped 0
Last reset never
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 103.16.17.210, Local port: 179
Foreign host: 103.16.17.209, Foreign port: 13799
Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes)
Event Timers (current time is 0x5002EFC):
Timer Starts Wakeups Next
Retrans 1407 1 0x0
TimeWait 0 0 0x0
AckHold 15191 2100 0x0
SendWnd 0 0 0x0
KeepAlive 1 0 0x0
GiveUp 0 0 0x0
PmtuAger 0 0 0x0
DeadWait 0 0 0x0
iss: 786668411 snduna: 786695626 sndnxt: 786695626 sndwnd: 31970
irs: 3197216748 rcvnxt: 3233753908 rcvwnd: 16089 delrcvwnd: 295
SRTT: 305 ms, RTTO: 343 ms, RTV: 38 ms, KRTT: 0 ms
minRTT: 0 ms, maxRTT: 404 ms, ACK hold: 200 ms
Flags: passive open, nagle, gen tcbs
Datagrams (max data segment is 1460 bytes):
Rcvd: 27795 (out of order: 6), with data: 26400, total data bytes: 36537159
Sent: 27131 (retransmit: 1, fastretransmit: 0), with data: 1405, total data bytes: 27214
=====================
show ip bgp filter-list 10
BGP table version is 2871652, local router ID is 103.225.6.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 43.247.6.0/24 0.0.0.0 0 32768 i
* i 103.225.6.1 0 100 0 i
*> 43.247.6.0/22 0.0.0.0 0 32768 i
* 0.0.0.0 32768 i
* i 103.225.6.1 0 100 0 i
*> 43.247.7.0/24 0.0.0.0 0 32768 i
* i 103.225.6.1 0 100 0 i
*> 43.247.8.0/24 0.0.0.0 0 32768 i
* i 103.225.6.1 0 100 0 i
*> 43.247.9.0/24 0.0.0.0 0 32768 i
* i 103.225.6.1 0 100 0 i
* i103.225.6.0/24 103.225.6.1 0 100 0 i
*> 0.0.0.0 0 32768 i
*> 103.225.6.0/22 0.0.0.0 32768 i
* i 103.225.6.1 0 100 0 i
* i103.225.7.0/24 103.225.6.1 0 100 0 i
*> 0.0.0.0 0 32768 i
*>i103.225.8.0/24 103.225.7.218 0 210 0 59334 i
* i103.225.9.0/24 103.225.6.1 0 100 0 i
*> 0.0.0.0 0 32768 i
07-22-2014 02:46 AM
I do see
Implicit Withdraw: 12
only thing i do see from your configuration missing is for Route-map
match list to be updated as below
ip prefix-list RadiusPathPrepend seq 150 permit 43.247.6.0/24
ip prefix-list RadiusPathPrepend seq 200 permit 43.247.7.0/24
ip prefix-list RadiusPathPrepend seq 250 permit 43.247.8.0/24
ip prefix-list RadiusPathPrepend seq 300 permit 43.247.9.0/24
Kindly update it should work for you now
HTH
Sandy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide