Greetings:
I have a older 2501 router I would like to use for a test lab if possible. the ram in very low a am looking for a vendor to by ram if possible.
Here is a posting of the h/w.
(1) Cisco 2501
rt1#sh version
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-I-L), Version 10.3(15), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Wed 18-Sep-96 15:01 by richardd
Image text-base: 0x0301B758, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (f
c1)
rt1 uptime is 1 minute
System restarted by power-on
System image file is "flash:/tftpboot/2500-IP-10.3.15", booted via flash
cisco 2500 (68030) processor (revision D) with 4096K/2048K bytes of memory.
Processor board serial number 02067177
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read ONLY)
###########
Am I wasting my time or should I move on and by something else?
Thanks. Roger
