cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
409
Views
0
Helpful
2
Replies

Packet over sonet.

hector.rojas
Level 1
Level 1

hello,

at my shop we current have 8540 serving as our wan block. We are currently using lane. We would like to migrate to POS. the question I have is can we introduce POS and have it run concurrently with ATM LANE. also I have not seem many how to literiture and you refer me to some urls. We have 5 location and each location has dual 8540. below I have included the show haredware from one of our systems

C8540 named 633CAT8540-MDF1, Date: 21:32:27 edt Mon Jun 24 2002

Slot Ctrlr-Type Part No. Rev Ser No Mfg Date RMA No. Hw Vrs Tst EEP

---- ------------ ---------- -- -------- --------- -------- ------- --- ---

0/* ARM PAM 73-4208-01 B0 0429AR8E Aug 09 00 0 3.0

1/* OCM Board 73-2833-06 A0 03341A5G Aug 26 99 0 6.0

1/0 HEX 155 Gen 73-3160-03 A0 03341AER Aug 26 99 0 3.0

2/* GIGETHERNET 73-3375-03 B0 0432BJX0 Aug 15 00 0 3.0

2/1 ACL Daughter 73-3959-03 A0 0429AQBQ Aug 15 00 0 2.0

9/* GIGETHERNET 73-3375-03 A0 03374ATH Sep 13 99 0 3.0

9/1 ACL Daughter 73-3959-02 A0 03353WSV Sep 13 99 0 2.0

slot: 0/* Controller-Type : ARM PAM

Part Number: 73-4208-01 Revision: B0

Serial Number: CAB0429AR8E Mfg Date: Aug 09 00

RMA Number: 0 H/W Version: 3.0

FPGA Version: 2.4

EPIF Version: 1704 CAM size: 64 KB

Ucode Version: 0.0 CAM Type: Dual

Port Phy Setup

Port 0: DONE GBIC Vendor: No vendor info.

Port 1: DONE GBIC Vendor: No vendor info.

slot: 1/* Controller-Type : OCM Board

Part Number: 73-2833-06 Revision: A0

Serial Number: MIC03341A5G Mfg Date: Aug 26 99

RMA Number: 0 H/W Version: 6.0

FPGA Version: 5.5

slot: 1/0 Controller-Type : HEX 155 Generic

Part Number: 73-3160-03 Revision: A0

Serial Number: MIC03341AER Mfg Date: Aug 26 99

RMA Number: 0 H/W Version: 3.0

FPGA Version: 1.21

slot: 2/* Controller-Type : GIGETHERNET PAM

Part Number: 73-3375-03 Revision: B0

Serial Number: CAB0432BJX0 Mfg Date: Aug 15 00

RMA Number: 0 H/W Version: 3.0

FPGA Version: 2.3

EPIF Version: 1704 CAM size: 64 KB

Ucode Version: 0.0 CAM Type: Dual

Port Phy Setup

Port 0: DONE GBIC Vendor: Methode Elec.

Port 1: DONE GBIC Vendor: No vendor info.

slot: 2/1 Controller-Type : ACL Daughter Card

Part Number: 73-3959-03 Revision: A0

Serial Number: CAB0429AQBQ Mfg Date: Aug 15 00

RMA Number: 0 H/W Version: 2.0

FPGA Version: 0.0

slot: 4/* Controller-Type : Route Proc

Part Number: 73-2644-09 Revision: A0

Serial Number: MIC043020BB Mfg Date: Aug 06 00

RMA Number: 0 H/W Version: 5.8

FPGA Version: 4.8

slot: 5/* Controller-Type : Switch Card

Part Number: 73-3315-08 Revision: C0

Serial Number: MIC04291ZX8 Mfg Date: Jul 16 00

RMA Number: 0 H/W Version: 8.3

FPGA Version: 1.5

slot: 5/0 Controller-Type : Feature Card

Part Number: 73-3408-06 Revision: A0

Serial Number: MIC04291ZD7 Mfg Date: Jul 16 00

RMA Number: 0 H/W Version: 4.1

FPGA Version: 4.18

slot: 6/* Controller-Type : Switch Card

Part Number: 73-3315-08 Revision: C0

Serial Number: MIC04291ZLU Mfg Date: Jul 14 00

RMA Number: 0 H/W Version: 8.3

FPGA Version: 1.5

slot: 6/0 Controller-Type : Feature Card

Part Number: 73-3408-06 Revision: A0

Serial Number: MIC04291Z3P Mfg Date: Jul 14 00

RMA Number: 0 H/W Version: 4.1

FPGA Version: 4.18

slot: 7/* Controller-Type : Switch Card

Part Number: 73-3315-08 Revision: C0

Serial Number: MIC04291ZKY Mfg Date: Jul 15 00

RMA Number: 0 H/W Version: 8.3

FPGA Version: 1.5

slot: 7/0 Controller-Type : Feature Card

Part Number: 73-3408-06 Revision: A0

Serial Number: MIC04291ZD8 Mfg Date: Jul 15 00

RMA Number: 0 H/W Version: 4.1

FPGA Version: 4.18

slot: 8/* Controller-Type : Route Proc

Part Number: 73-2644-09 Revision: A0

Serial Number: MIC043020A5 Mfg Date: Aug 03 00

RMA Number: 0 H/W Version: 5.8

FPGA Version: 4.8

slot: 9/* Controller-Type : GIGETHERNET PAM

Part Number: 73-3375-03 Revision: A0

Serial Number: CAB03374ATH Mfg Date: Sep 13 99

RMA Number: 0 H/W Version: 3.0

FPGA Version: 2.3

EPIF Version: 1704 CAM size: 64 KB

Ucode Version: 0.0 CAM Type: Dual

Port Phy Setup

Port 0: DONE GBIC Vendor: No vendor info.

Port 1: DONE GBIC Vendor: No vendor info.

slot: 9/1 Controller-Type : ACL Daughter Card

Part Number: 73-3959-02 Revision: A0

Serial Number: CAB03353WSV Mfg Date: Sep 13 99

RMA Number: 0 H/W Version: 2.0

FPGA Version: 0.0

DS1201 Backplane EEPROM:

Model Ver. Serial MAC-Address MAC-Size RMA RMA-Number MFG-Date

------ ---- -------- ------------ -------- --- ---------- -----------

C8540 2 15419328 0002FDA08800 1024 0 0 Aug 16 2000

cubi version : 11

Power Supply:

Slot Part No. Rev Serial No. RMA No. Hw Vrs Power Consumption

---- ---------------- ---- ----------- ----------- ------- -----------------

0 34-0918-02 C0 SON04260962 00-00-00-00 1.0 2746 cA

1 34-0918-02 C0 SON04301794 00-00-00-00 1.0 2746 cA

2 Replies 2

Frederic Vanderbecq
Cisco Employee
Cisco Employee

You can have POS and LANE in the same switch but not LANE over POS.

Can you refer me to documentation. in particular the how to. From what I understand all you need to do is assign a port to be POS configure an IP and thats it. Is this correct? or is there more than meets the eye. Thank you for your response.

Review Cisco Networking for a $25 gift card