PRI config

[mamta.gohil]

Can anybody give me basic PRI configuration . I have connected my pri link to controller e1 1/0 of my router

it is urgent Please

Regards

Mahesh

[desai.jaideep]

Hi

First of all pls tell its for voice or data?

Regards

JD

[mamta.gohil]

it is for data jaideep

config may

controller E1 1/0

framing NO-CRC4

pri-group timeslots 1-31

or anything else required

regards

mahesh

[desai.jaideep]

Hi

Since you are configuring for data...the config will be "channel-group".

I configure for Rel. or Tata 2Mbps e1 unframed mode like following:

contr e1 1/0

channel-group 0 timeslots 1-31 speed 64

framing no-crc4

linecode HDB3

clock source line

serial 0/0:15

ip add

And this works.

Hope that helps.Pls revert back in caseof any prob.

Pls rate helpful posts.

Regards

JD

[mamta.gohil]

dear jd

i think there is issue with provider link

anyway thanks for your support

regards

mahesh