Problem with 1603 router

[rameshpillai]

Hi

lately i have seen lot of collison on my 1603R router. i am unable to locate the source of collison

Can any body guide me how to chk this out

Secondly every day morning my router hang with error as shown below

______________________________________________

-Process= "IP Input", ipl= 0, pid= 11

-Traceback= 20DA056 20DB740 20D8174 20D86D2 24235DA 24252B4 241DC6E 21AD650 21AC

CC6 21ACE20 21ACF44

1d01h: %SYS-2-NOBLOCK: printf with blocking disabled.

-Process= "IP Input", ipl= 0, pid= 11

-Traceback= 2072494 24235EE 24252B4 241DC6E 21AD650 21ACCC6 21ACE20 21ACF44

1d01h: %SYS-2-MALLOCFAIL: Memory allocation of 32728 bytes failed from 0x20D816C

, pool Processor, alignment 0

-Process= "IP Input", ipl= 0, pid= 11

-Traceback= 20DA056 20DB740 20D8174 20D86D2 24235DA 24252B4 241DC6E 21AD650 21AC

CC6 21ACE20 21ACF44

1d01h: %SYS-2-NOBLOCK: printf with blocking disabled.

-Process= "IP Input", ipl= 0, pid= 11

-Traceback= 2072494 24235EE 24252B4 241DC6E 21AD650 21ACCC6 21ACE20 21ACF44

________________________________________________

feel both the probs could related

thanks in advance

Regds

Ramp

[Georg Pauwen]

Hello,

this could either be a memory fragmentation problem, a Cisco IOS bug, or even a virus. Which IOS version are you running ?

Have you done any changes to your configuration, or upgraded the IOS ? If possible, can you post your configuration?

You might also want to check this document:

Troubleshooting Memory Problems

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6f3a.shtml#tshooting

Regards,

GP