Other Network Architecture Subjects

Hello,I am trying to translate VLAN-x to VLAN-y on the same switch 3550 physically by uplinking two ports from the same switch :interface GigabitEthernet0/7 switchport mode access y duplex full speed 100!interface GigabitEthernet0/8 switchport access...

I am unable to open a VPN connection from inside my LAN (at work) to any outside VPN Server. For an example, I am using the Windows XP Client to connect to a remote Windows 2003 RRAS server. From my home network, I am able to connect to the example...

HiI am configuring a Cisco 4507R with 3 Vlans.1 for Management and the other two for Users.With the Cisco Native IOS the VLANs remains is UP/Down State if no one is attached to the VLAN.For the Management VLAN on a single site with no additionl acces...

Hello, configuring snmp on a Cisco 3560 and a 4507R I found that each time I terminate a telnet session they send a Cisco Telnet Trap to my snmp server.Does anyone knows how to disable this feature?Many thanks,Domenico.

I need to nat traffic from one vlan to multiple outside interfaces on a 6509 switch with msfc2. I think the following commands will work but I wanted to make sure. Is there a way to perform the same function with an overload command instead of a pool...

I want to make a access-list to allow users to use the web and e-mail (hosted outside the office) only.Users don't need anything else other than the web and e-mail at the moment.New to access-list can you restrict that traffic that way?

We are considering purchasing (2) bundled T1's from an ISP for internet connectivity, 3M total BW. My internet router will be a 7206 with a PA-MC-4T1 module (4 port multichannel T1 w/ CSU/DSU). Will this support the bundled T1's?

Hey Guys,Can anybody point me in the right direction.I want to set up my 3725 to use RADIUS installed on a 2000 server as its authentication method for PPP connections.

I'm trying to understand in a VoIP situation over a WAN link whether you'd use LFI with FRF.12 or limit the frame size using MTU? The link is over frame relay. Anyone any thoughts?

I have an enterprise network with 30 routers linked with each other through an MPLS VPN. The issue is that I want to monitor bandwidth utilization in each router´s serial interface connected to the VPN and to be able to determine how much of that ut...

Hi ALL!Our equip.: cisco 7507 We are received from ISP BGP Full view + defaultand have high cpu util on 7507:--------------------------------m10-7507#sh proc cpu his 6666666 1111111111 ...

We have a new dedicated full T1 line to another office location. That location has an internet line. We'd like to connect our two Cisco 1700s together over this T1 line so both offices have an internet connection. However, I'm having major diffi...

we have a design case where we have total 1800 sites. In total we have more than 5000 Routes. Currently we are planning to use OSPF here. We devided 1800 sites in to 60 areas with 4 ABRs. Each ABR is taking care of 15 Areas. So each ABR has to peer w...

Hi i am running lms 2.2 with ciscoview 5.5, in order to view the pix we needed to install the patch. this patch comes in the zipped format with no .exe extension to install the same. any ideas where exactly this folder needs to be placed for the cisc...

We are running the Cat-3524's and need to send logs to two different syslog servers. So, we have configured "logging 172.21.87.1" and "logging 172.17.87.1". The 172.21.87.1 server receives logs OK, but not the 172.17.87.1 one. Does anybody know if th...