cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
407
Views
0
Helpful
2
Replies

Question SRM with 2 chassis & HSRP

richard_tufaro
Level 1
Level 1

Hi all. I just wanted to throw this out there incase anyone has run into any issues.

Right now, I have 2 6500's with 2 MSFC's in each PFC2's etc. They are both running Hybrid (CatOS 8.2(1), MSFC 12.1(20)E2. Identical hardware.

I would like to run SRM in both (for line card redundancy), as well as HSRP between chassis for layer 3 redundancy and chassis redundancy.

Does anyone see an issue with this configuration?

2 Replies 2

Prashanth Krishnappa
Cisco Employee
Cisco Employee

You are on the right track.. SRM for MSFC redundancy in the chassis and HSRP for chassis redundancy is the way to go

Thanks. I just wanted to see if anyone had any issues with doing this sort on config. Or any caveats, of going with this configuration that i should be aware of.

Review Cisco Networking for a $25 gift card