12-15-2003 08:15 AM - edited 03-02-2019 12:21 PM
Is it possible to put more than one rate-limit on an interface so that I can use a Timeband to increase the bandwidth during the evening?
Bandwidth restricted to 3.5Mbps as I have voip running on the rest of the 10Mbps link.
I'd like to increase out of office hours so that server backups can utilise more than the 4Mbps given.
rate-limit input 3496000 8000 8000 conform-action set-prec-transmit 3 exceed-action drop
rate-limit output 3496000 8000 8000 conform-action set-prec-transmit 3 exceed-action drop
Thanks
Solved! Go to Solution.
12-15-2003 11:42 AM
Hello,
yes that is possible. In your case I would create time-based access control lists and apply them to the rate-limit commands:
rate-limit input access-group 101 3496000 8000 8000 conform-action set-prec-transmit 3 exceed-action drop
!
rate-limit output access-group 101 3496000 8000 8000 conform-action set-prec-transmit 3 exceed-action drop
!
time-range OFFICEHOURS
periodic weekdays 08:00 to 17:00
!
access-list 101 permit ip any any time-range OFFICEHOURS
HTH,
Georg
12-15-2003 11:42 AM
Hello,
yes that is possible. In your case I would create time-based access control lists and apply them to the rate-limit commands:
rate-limit input access-group 101 3496000 8000 8000 conform-action set-prec-transmit 3 exceed-action drop
!
rate-limit output access-group 101 3496000 8000 8000 conform-action set-prec-transmit 3 exceed-action drop
!
time-range OFFICEHOURS
periodic weekdays 08:00 to 17:00
!
access-list 101 permit ip any any time-range OFFICEHOURS
HTH,
Georg
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide