10-01-2013 02:42 PM - edited 03-03-2019 07:11 AM
Hello,
can you please tell me how can I determine the dscp value in the results?
and why we have an asterisk in front of the line Se1 / 0 192.168.87.156?
Router#sh ip cache 10.136.89.1 255.255.255.255 flow
IP packet size distribution (1360944M total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
.002 .411 .481 .013 .007 .005 .004 .002 .001 .001 .001 .008 .001 .002 .000
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
.000 .000 .001 .007 .042 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 278544 bytes
4079 active, 17 inactive, 445750941 added
1698726152 ager polls, 0 flow alloc failures
Active flows timeout in 30 minutes
Inactive flows timeout in 15 seconds
IP Sub Flow Cache, 165128 bytes
4079 active, 1041 inactive, 445750941 added, 445750941 added to flow
0 alloc failures, 1734 force free
5 chunks, 545 chunks added
last clearing of statistics never
Protocol Total Flows Packets Bytes Packets Active(Sec) Idle(Sec)
-------- Flows /Sec /Flow /Pkt /Sec /Flow /Flow
TCP-Telnet 1300843399 302.8 7 162 2239.3 1.2 0.5
TCP-FTP 4168409 0.9 4 47 4.5 0.6 1.4
TCP-FTPD 40373 0.0 14 674 0.1 0.0 1.4
TCP-WWW 31657473924 7370.8 4 401 32146.8 0.7 0.9
TCP-SMTP 55914 0.0 3 255 0.0 0.2 1.6
TCP-X 90872816 21.1 2 119 60.3 0.9 2.6
TCP-BGP 7426 0.0 1 51 0.0 0.0 0.3
TCP-NNTP 10494 0.0 1 49 0.0 0.0 0.4
TCP-Frag 12 0.0 8 1480 0.0 0.0 0.8
TCP-other 40417291290 9410.3 4 290 37753.5 0.3 2.1
UDP-DNS 101696764 23.6 2 77 68.5 0.6 3.6
UDP-NTP 13067239 3.0 1 78 3.1 0.0 5.0
UDP-TFTP 674721 0.1 6 86 1.0 3.5 3.8
UDP-Frag 489782 0.1 706 1424 80.5 1.5 1.8
UDP-other 46275723602 10774.4 22 82 243252.3 0.8 0.5
ICMP 767922077 178.7 5 283 988.4 1.2 2.5
GRE 74492207 17.3 15 114 271.3 2.3 0.2
IP-other 701 0.0 1 21 0.0 0.1 4.2
Total: 120704831150 28103.8 11 141 316870.2 0.6 1.2
SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts
Gi0/0 10.136.89.1 Se1/0* 192.168.87.156 01 0000 0800 5
Gi0/0 10.136.89.1 Se1/0 192.168.87.156 01 0000 0800 5
Se1/0 192.168.67.176 Gi0/0* 10.136.89.1 01 0000 0000 5
Se1/0 192.168.67.16 Gi0/0 10.136.89.1 01 0000 0000 5
Solved! Go to Solution.
10-02-2013 01:06 AM
Hi,
To see QoS information you need to use this command : show ip cache verbose flow.
The asterisk signals you it is an egress flow.
Regards
Alain
Don't forget to rate helpful posts.
10-02-2013 01:06 AM
Hi,
To see QoS information you need to use this command : show ip cache verbose flow.
The asterisk signals you it is an egress flow.
Regards
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide