reconfiguring alias command

[mgoldasich]

our current config doesnt permit us to configure the PIX from the PDM.

i have several (below) alias commands that need to be converted:

alias (inside) 67.39.116.156 192.168.2.13 255.255.255.255

alias (inside) 67.39.116.151 192.168.2.12 255.255.255.255

alias (inside) 67.39.116.150 192.168.2.11 255.255.255.255

alias (inside) 67.39.116.154 192.168.1.217 255.255.255.255

alias (inside) 67.39.116.147 192.168.2.21 255.255.255.255

alias (inside) 67.39.116.148 192.168.2.10 255.255.255.255

alias (inside) 67.39.116.149 192.168.1.214 255.255.255.255

i have searched support but have found nothing.

thx in advance.

[b.hsu]

The alias command has two functions:

It can be used to perform "DNS Doctoring" of DNS replies from an external DNS server.

In DNS Doctoring, the PIX changes the DNS response from a DNS server to be a different IP address than the DNS server actually answered for a given name.

This process is used when you want the actual application call from the internal client to connect to an internal server by its internal IP address.

For more information:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aee.shtml