Hi, im wondering if this architecture is even possible. I have 2 routers R1 and R2. R1 is the RP and is connected to R2. Im using sparse mode to pull the multicast feed from the RP to R2 and reflected with a new Multicast group via a Virtual Interface. Now the tricky part im having is R1 has a vrf OUT which the new Multicast group is suppose leave. I placed a RP on the vrf OUT but im not seeing the new source on the vrf RP. Also R1, R1 vrf OUT, and R2 are all in the same network. Is possible for R2 to have 2 RPs?
