03-04-2003 01:15 AM - edited 03-02-2019 05:33 AM
OK this may be trivial but it is annoying me. How do I set the timezone on my router?
I have a 2621with IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(2)XC2. My clock is set to 08:56:19.982 UTC Tue Mar 4 2003, which is 5 hours fast. I look all through the command set but I can not find where to specify Eastern timezone. I would also like to set no daylight savings.
Solved! Go to Solution.
03-04-2003 04:45 AM
Assuming you are picking up your time as UTC from another source, the command you need to use is:
clock timezone zone hours [minutes]
where zone is the name of your timezone and hours is the offset from UTC. The zone can be any relevant abbreviation. In this instance, to get your settings corrected, you could use:
clock timezone EST -5
To turn off daylight savings, use:
no clock summer-time
The guide to configuring timezones etc can be found at:
and the command reference is at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_r/frprt3/frgenral.htm
03-04-2003 04:45 AM
Assuming you are picking up your time as UTC from another source, the command you need to use is:
clock timezone zone hours [minutes]
where zone is the name of your timezone and hours is the offset from UTC. The zone can be any relevant abbreviation. In this instance, to get your settings corrected, you could use:
clock timezone EST -5
To turn off daylight savings, use:
no clock summer-time
The guide to configuring timezones etc can be found at:
and the command reference is at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_r/frprt3/frgenral.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide