I have a problem i need help with, i got i cisco 2600 series router recently which is used,when i first started it ,the console screen goes only to ROMMON and can't boot from the IOS image, this is what iam getting : and i also wanna make sure that this is not because this is no flash and/or NVRAM in the device installed so i looked up a picture for the back of it online and it looks just like mine so i thought this is norma..Any ideas?
Thank you.
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
rommon 1 >
---
Posted by WebUser Hayder Aero from Cisco Support Community App
