I am testing traffic for wireless devices having AP and SU, traffic was going fine for firtst time after booting up the server then it's start dropping of packets even for low traffic in KB, also instead of AP and SU i tried with connect a self loop and tested the traffic but still packet drop is there for minimal traffic( i.e. KB or MB).I am using 10G path between TRex server and DUT.
Details about my TRex Server:
HP ProLiant DL160 Gen9
128 GB RAM
I am running TRex on a bare metal with centOS installed on the top of it.
NIC Details:
06:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
06:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
SFP+ module :
EOLP 10G SM DDM, 10Km,1310nm
Huge page detail:
Huge page size 2048
Huge pages = 106
