01-12-2005 04:34 AM - edited 03-02-2019 09:01 PM
Hello Guys ,
I have a 1721 router with a ethernet and a WIC 2T smart serial card.I am have to do DLSW and SDLC , but enfortunetly i am not been able to run both these commands on my router.Nor " encapsulation sdlc " in my serial interface .IOS version is 12.2
Can you guys please help me as what is the root cause of my problem. and is there is any other hardware or software IOS is required for the same .
Regards,
Dave
Solved! Go to Solution.
01-12-2005 08:11 AM
You need to go with one of the following feature sets:
ADVANCED ENTERPRISE SERVICES c1700-adventerprisek9-mz.12.3-2.XE
ENTERPRISE BASE c1700-entbase-mz.12.3-2.XE
ENTERPRISE SERVICES c1700-entservicesk9-mz.12.3-2.XE
IP/ADSL/IPX/AT/IBM PLUS c1700-bnr2sy7-mz.12.3-2.XE
IP/ADSL/IPX/AT/IBM/FW/IDS PLUS IPSEC 3DES c1700-bk9no3r2sy7-mz.12.3-2.XE
You could find more information on the right feature set to use with the Feature Navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Hope this helps,
01-12-2005 04:53 AM
What feature set do you have on that router. You probably need the Enterprise feature set (js).
Hope this helps,
01-12-2005 05:24 AM
Hi ,
Thanks for your reply !
Please find the details below.
IOS version :12.3(2XE) Early deployment Release Software (FCI)
C1700-Y-MZ-123-2XE.bin
32 KB of NVRAM
32768 KB of FLASH .
Can you please let me what is the minimum version of IOS i require for 1721 to configure SDLC & DLSW.
Waiting for Reply
Regards,
Dave
01-12-2005 08:11 AM
You need to go with one of the following feature sets:
ADVANCED ENTERPRISE SERVICES c1700-adventerprisek9-mz.12.3-2.XE
ENTERPRISE BASE c1700-entbase-mz.12.3-2.XE
ENTERPRISE SERVICES c1700-entservicesk9-mz.12.3-2.XE
IP/ADSL/IPX/AT/IBM PLUS c1700-bnr2sy7-mz.12.3-2.XE
IP/ADSL/IPX/AT/IBM/FW/IDS PLUS IPSEC 3DES c1700-bk9no3r2sy7-mz.12.3-2.XE
You could find more information on the right feature set to use with the Feature Navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Hope this helps,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide