11-13-2011 12:39 PM - edited 03-03-2019 06:25 AM
Hi, there I'm preparing for my CCNA Security and want to practice on SDM but unfortunately I can't open it.
My lab is Windows 7 Gns 3.7.4 Java 1.6.0_03 (it was told me that's the compatible one) IOS: c3640-jk9s-mz.124-16.bin and SDM 2.5
My config is:
int fa0/0
ip address 172.16.1.254 255.255.255.0
no shut
exit
ip domain-name router.com
username test privilege 15 password test
ip http server
ip http secure-server
ip http authentication local
line vty 0 4
login local
transport input telnet ssh
privilege level 15
line cons 0
login local
transport output telnet ssh
privilege level 15
exit
crypto key generate rsa gen mod 1024
THE ISSUE:
1. using http won't pop up anything can't run on http
2. using HTTPS passes the popup windows but stops at:
"Please wait while sdm is loading the current configuration from your router. Discovering router hardware attributes."
As the picture shows:
And then nothing happens.
I'm playing around with it for a few days, hands up have no more ideas what to do...if you have any ideas please share it - really wanna check the SDM before exam.
Thanks.
11-15-2011 07:03 AM
Nobody???
11-25-2011 07:06 PM
what i would do next is to SDM another router with different IOS image to see if that works.
11-26-2011 11:05 AM
Hi,
Can you try this command:
ip http timeout-policy idle 600 life 86400 requests 10000
Regards.
Alain
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: