Serial Interface Error Message

[DOUGLAS EVANS]

Can someone tell me or direct me on what the following console error message means. The T-1

link is very slow, 40-60% success rate on a ping THANKS.

1w6d: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x80

-Traceback= 80050734 800272C0 8002CC60 8002A860 8014C3B0 8012163C 80140EF8 80140EF8 801216FC 80125650 80127784 80122908 80008120

1w6d: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x80

-Traceback= 80050734 800272C0 8002CC60 8002A860 8014C3B0 8012163C 80140EF8 80140EF8 801216FC 8012660C 80127784 80122908 80008120

1w6d: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x80

-Traceback= 80050734 800272C0 8002CC60 8002A860 8014C3B0 8012163C 80140EF8 80140EF8 801216FC 80126604 80125E7C 80122908 80008120

1w6d: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x80

-Traceback= 80050734 800272C0 8002CC60 8002A860 8014C3B0 8012163C 80140EF8 80140EF8 801216FC 80125DFC 80127784 80122908 80008120

D. Evans

[vmiller]

Back to topERROR MESSAGE NOTIFICATIONS (if any)

%IPFAST-2-PAKSTICK (x1): Corrupted pak header for [chars], flags [hex]

Explanation: A programming error has occurred.

Recommended Action: Copy the error message exactly as it appears on the console

or in the system log. Issue the show tech-support command to gather data that may

help identify the nature of the error. If you cannot determine the nature of the

error from the error message text or from the show tech-support command output,

contact your Cisco technical support representative, and provide the representative

with the gathered information.

THis one needs to go to the TAC