Setting up a Nat on Cisco C820

[zakariaarrassi]

Hi,

first of all I would like to apologize for my poor english.

I've set up a Webserver based on a Lamp (Linux Apache Mysql Php).

Let's say that the webserver ip is 10.0.0.165.

I would like to set up a Nat so that all incoming message from port 80 (http) will be forwarded to my webserver.

I started the terminal to connect to my router.

But i'm lost in the douzend commands that I have for me.

Can you help me.

Thank you

[fmachoka]

Hello

Below are URLs on various scenarios in NAT configuration. I am sure one will fit your network translation requirements.

Configuring Static and Dynamic NAT Simultaneously

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml

NAT: Local and Global Definitions

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094837.shtml

NAT - Translation of External IP Addresses Only

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087bae.html

NAT

http://www.cisco.com/en/US/tech/tk648/tk361/tk438/tech_protocol_home.html

Regards

fm