Hi group, are there any books that can explain the below results to me, I need to understand what are good and what are bad figures.
If I telnet to the router I can only stay connected for around 20 seconds.
Cheers all
ADSL-router#show dsl int atm 0
ATM0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.1 (G.DMT) Annex A
ITU STD NUM: 0x03 0x2
Vendor ID: 'STMI' 'TSTC'
Vendor Specific: 0x0000 0x0000
Vendor Country: 0x0F 0xB5
Capacity Used: 12% 40%
Noise Margin: 31.5 dB 23.0 dB
Output Power: 16.0 dBm 12.5 dBm
Attenuation: 52.0 dB 23.5 dB
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x93
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 7658 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100
Init FW: init_25042.bin
Operation FW: AMR-R-2.5.042.bin
FW Version: 2.542
Interleave Fast Interleave Fast
Speed (kbps): 0 576 0 288
Cells: 0 79765 0 2178456
Reed-Solomon EC: 0 0 0 0
CRC Errors: 0 0 0 0
Header Errors: 0 0 0 0
LOM Monitoring : Disabled
DMT Bits Per Bin
000: 0 0 0 0 0 0 0 3 4 4 3 4 4 4 4 5
010: 5 6 6 6 5 5 5 4 4 4 4 3 3 0 0 0
020: 0 0 0 0 0 0 2 2 2 2 3 2 2 2 0 2
030: 3 3 4 3 3 3 3 3 3 4 4 4 3 3 4 3
040: 0 3 4 3 3 2 3 3 3 3 3 2 3 3 2 3
050: 2 2 2 2 3 3 2 3 2 2 2 2 2 2 2 2
060: 2 2 2 2 2 2 2 2 2 0 0 2 2 2 2 2
070: 2 2 2 2 2 2 2 2 2 0 0 0 0 0 0 0
080: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
090: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0A0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0B0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0C0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0D0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0E0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0F0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
