Other Network Architecture Subjects

Hi Forumer'si would like to ask a very legacy network technology -  IBM's SNA how it working on TCPThe topology as shown at the attachment  SNA topology.png (backgroup is banking sector)1. At HQ, AS400 mainframe physically connect to router (with SNA...

could anyone tell me if it is possible to NAT authentication requests for a specific TACACS server to an alternative address, which would be a new TACACS server - all device subnets have direct connections to a PIX firewalleg:  network devices on 10....

Hi All , Is there Cisco   ios  in  any other language  apart from English  ? If there how can I download the Japanese  version of image for  a  7200 series router ( for eg) . Regards ,Sinjish.K

Hi all, I have a problem with a new installation of LMS4, I receive too much alarms and I need to reduce o compact this alarms.For example, when device is unreachable, I don`t want receive alarms for device, interface,etc. I need to receive a single ...

Hi,I have a 7606, with redundant RSP (RSP720-3C-GE with sub-modules 7600-PFC3C , 7600-MSFC4) . 3C is currently only able to handle 256K routes. How can i upgrade to handle 1M routes? Plus the router is already having a 7600-ES20-2X10G with DC3 and a ...

Hi,I have the following; a Cisco 877 connected to an ADSL line with a public /29.What I've been asked to do is make 2 of the 5 usable IP's non-NATed so they can assigned to 2 devices and then NAT 3 of the other IP's on to the 192.168.x.y internal LAN...

I've configured cisco ACE module in bridged mode. I can be able to ping the VIPs. however, i can't be able to open the application ports using the VIPs. Anybody would be able to assist?

Hello;I'm trying to create a L3 core network. The core equipment will be Cisco 3750 enhanced. My idea is make each link between core 3750 a routed interface, with /30 IP addresses.The problem is the customer needs some VLANs extended across the full ...

I want to connect a specific SENSOR(IP DEVICE) to my network wirelessly!{ The application is as simple as connecting a  Trednet wireless adapter to the TV to access the HOME WIRELESS NETWORK to WATCH NETFLIX on INTERNET TV!But my Client wants to use ...

Does anyone have experience, and is willing to share, on setting up access points where the connected users are authenticated through 802.1x? Here is my setup. Cisco 1240AG and 1131AG connected to an 802.1x enabled switch. The switch gets puts users ...

Dear Sir, I have a question about memory usage. When I use command "show ver", it shows Cisco 2821 (revision 53.51) with 223232K/38912K bytes of memory. When I use command "show process memory", it shows Processor Pool Total:  112570512 Used:  385533...

Hi,I have been trying to add devices to RME with no luck. I am running into DDTS CSCin56596 which says to reinitialize the database. Well I did once andn then I tried to import from a csv file and the device import failed again. So this time I was...

Hi fraindsI have cisco 1841 router1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(3g)ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)with2 FastEthernet interfaces2 Serial(sync/async) interfaces1 Virtual Private Network (VPN) Mod...