06-24-2006 07:20 AM - edited 03-03-2019 03:48 AM
Anyone know what this command does or where it is docuemnted.
Accidently typed it in. It is a non enabled command that appears to display some type of debugging information. If I had to guess it is ospf events but I cannot find anything to confirm that
06-24-2006 08:01 AM
It looks like it is the 'show ip ospf events' command. But they are listing as a privileged exec command though.
06-26-2006 10:53 PM
I had the same experience as you long time ago. here they are. In my opinion, it's kinds of hidden command for highest debbuging command which should not show users.
switch#sh ip ospf e
1 10388 Generic: ospf_build_rtr_lsa 0x0
2 10888 Elect DR: GigabitEthernet0/2 10.0.0.1
3 10888 Elect BDR: GigabitEthernet0/2 10.0.0.2
4 10888 i/f state nbr chg: GigabitEthernet0/2 0x5
5 20488 Generic: ex_delete_old_routes 0x7
06-27-2006 03:03 AM
Hi there,
Check out this link for more undocumented commands:_
http://www.elemental.net/~lf/undoc/
Regards,
LH
Please rate all posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide