cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1108
Views
0
Helpful
3
Replies

ssh on IPSERVICES ver. 12.2(25)SEB4

aperez2004
Level 1
Level 1

does any one know how to enable ssh? I enable aaa new-model, I give the domain name user name and password, but it does not have the crypto command to create the key nor does have the sh ip ssh.

Am I missing something?

3 Replies 3

haithamnofal
Level 3
Level 3

Hi,

Your software should be cryptographic software image; please browse to this link to guide you on how to enable SSH.

http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00801cde5f.html

I'm also trying to enable SSH on my 2950 catalyst switch but my IOS version 12.2(22)EA4 doesn't support SSH since it's not cryptographic IOS; I tried to upgrade it to a cryptographic version but the upgrade failed with me. I'm posting a question about the upgrade and still waiting a response:) The post is titled as "Upgrading 2950 Switch Firmware" in case you faced a similar problem and wanted to add your comments to the post.

Good Luck,

Haitham

Well, I went to the "Software Advisor" tool and it says that this image I have supports ssh v2. However, I do not know if the image that I have supports cryptographic because in the show version command it does not mention anything about it.

I had similar problem. You have to upgrdae to this Version.

12.1(22)EA7

SSH didn't work on 12.1(22)EA6 for me.