Subnetting

[TS40]

Case study

The newly acquired building consists of a reception department and an
administration + management department. After consulting with the
management, designed the following layout. After some minor adjustments, our
our technical department to install the hardware devices listed below. These
should now be fully configured.

Firt
Floor:

Wired lan: x.x.x.x//16

Wireless Lan Controller:
On this device we create 3 Vlans for the networks below.

1. 802.11 visitors x.x.x/24

2. 802.11 employees x.x.x.x/24

3. 802.11 management x.x.x.x/28

Printer First Floor has a fixed IP

Private AP 192.168.0.0/30
SSID should NOT be visible.

My start ip for the first floor is 192.220.x.x./16

Could someone help me with just subnetting the above network

I am attaching the packet tracer.
It would be a great help if the ip's were put in there as text nothing needs to be configured

[M02@rt37 · Accepted solution]

Hello @TS40 

Just as example

Wired LAN: 192.220.1.0/24 (for example)

802.11 Visitors: 192.220.2.0/24

802.11 Employees: 192.220.3.0/24

802.11 Management: 192.220.4.0/28

Private AP: 192.168.0.0/30 (using 192.168.0.1 for AP and 192.168.0.2 for the other end)

Printer First Floor: 192.220.5.5 (for example)

[TS40]

Can sombody check my packet tracer please all the information to help me is in the packet tracer.

Thanks in advance