cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
312
Views
0
Helpful
2
Replies

suitable IOS for cat6509 L2 and L3

rkbhatt
Level 1
Level 1

Hi,

Can any one suggest the stable running on cat 6509.for both L2 and L3.

please find the sh mod and sh ver of 6509

SM-MB-BSW1> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

4 4 16 1000BaseX Ethernet WS-X6516-GBIC no ok

5 5 16 1000BaseX Ethernet WS-X6516-GBIC no ok

Mod Module-Name Serial-Num

--- ------------------- -----------

1 SAD053800NE

15 SAD053703HN

3 SAL0540CHXR

4 SAD0540061N

5 SAD053906MA

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-01-64-15-55-e0 to 00-01-64-15-55-e1 3.2 6.1(4) 6.2(2)

00-01-64-15-55-de to 00-01-64-15-55-df

00-d0-05-4a-a8-00 to 00-d0-05-4a-ab-ff

15 00-07-85-45-a4-40 to 00-07-85-45-a4-7f 1.2 12.1(7a)E1 12.1(7a)E1

3 00-07-4f-69-04-48 to 00-07-4f-69-04-77 5.0 5.4(2) 6.2(2)

4 00-d0-c0-d6-68-f4 to 00-d0-c0-d6-69-03 3.0 6.1(3) 6.2(2)

5 00-d0-c0-d6-5d-74 to 00-d0-c0-d6-5d-83 3.0 6.1(3) 6.2(2)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- ----------------------- ------------------- ----------- ------

1 L3 Switching Engine II WS-F6K-PFC2 SAD05370755 2.0

SM-MB-BSW1> (enable) sh ver

WS-C6509 Software, Version NmpSW: 6.2(2)

Copyright (c) 1995-2001 by Cisco Systems

NMP S/W compiled on Jun 11 2001, 12:44:26

System Bootstrap Version: 6.1(4)

System Web Interface Version: Engine: 5.3.1 ADP device: Cat6000 ADP Version: 1.5

ADK: 40

Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA054100CS

PS1 Module: WS-CAC-1300W Serial #: SNI05070271

PS2 Module: WS-CAC-1300W Serial #: SNI05360737

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAD053800NE Hw : 3.2

Fw : 6.1(4)

Fw1: 6.1(3)

Sw : 6.2(2)

Sw1: 6.2(2)

WS-F6K-PFC2 SAD05370755 Hw : 2.0

3 48 WS-X6348-RJ-45 SAL0540CHXR Hw : 5.0

Fw : 5.4(2)

Sw : 6.2(2)

4 16 WS-X6516-GBIC SAD0540061N Hw : 3.0

Fw : 6.1(3)

Sw : 6.2(2)

5 16 WS-X6516-GBIC SAD053906MA Hw : 3.0

Fw : 6.1(3)

Sw : 6.2(2)

15 1 WS-F6K-MSFC2 SAD053703HN Hw : 1.2

Fw : 12.1(7a)E1

Sw : 12.1(7a)E1

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 130944K 65576K 65368K 32768K 10805K 21963K 512K 300K 212K

Uptime is 147 days, 20 hours, 26 minutes

Thanks

2 Replies 2

rkbhatt
Level 1
Level 1

I would make a suggestion of 6.3(10) for the supervisor and 12.1(11b)E4 for the MSFC.

Prashanth Krishnappa
Cisco Employee
Cisco Employee

I suggest that you read the release notes before making a decision

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/index.htm

6.4(3) and 12.1(11b)E11 should be good