10-25-2005 11:43 AM - edited 03-03-2019 12:33 AM
I would like to set up a switch as outside, it 'sits' between telcom router and out firewall untrust.
router e1 -> cisco switch ->firewall untrust port, firewall trust port->our inside switch.
my question: how can I set up a management ip address for this outside switch to manage it from our inside network.
Thank you in adv.
10-25-2005 11:59 AM
Since you are managing it from inside interface of firewall you should be able to configure the switch (vlan 1 or any management vlan) with a public IP address from the same subnet as the firewall and router.
Preferably use SSH over telnet.
10-25-2005 02:11 PM
our router is managed by XO, firewall untrust 71.5.51.130, trust 192.168.11.1.
router - switch - firewall
can I assign 71.5.51.129 for the switch between? just wondering...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide