T1 throughput

[diek]

I have 4 remote connections using seperate t1 lines.

Each has a 1721 router on each end.

What would be a simple test to check the thruoughput

I am getting on these t1 line.

I have a simple test for my lan connection call Lanperf but it is not giving me a true reading on T1 lines. I was looking for somthing that would send packets of data between the two end points and determine the bit per sec transfer rate.

Thanks Ken

[Georg Pauwen]

Hello Ken,

you might want to try TTCP, check this link for details:

Using Test TCP (TTCP) to Test Throughput

http://www.cisco.com/warp/public/471/ttcp.html

HTH,

GP

[scottmac]

Take a look at Qcheck, by Ixia.

QCheck runs on a PC (actually, one at each end of the connection) and can give you a pretty good indication of Throughput, latency, and packet drop.

Here's the link: http://www.ixiacom.com/products/performance_applications/pa_display.php?skey=pa_q_check

QCheck is free.

Good Luck

Scott

[thisisshanky]

Make sure while using qcheck, you install the software on two endstations and also that your firewall on the nic is disabled.