05-03-2017 11:02 PM - edited 03-03-2019 08:32 AM
I have a Cisco 891F router that I have been trying to set it up for remote access for a while.
IOS is c800-universalk9-mz.SPA.153-3.M6.bin
Configs are
Current
version 15.3
service timestamps debug
service timestamps log
no service password-encryption
!
hostname Router_Fef_Pak
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$CIOB$49J2KXNkFcaRHSGiSZ/fs/
!
aaa new-model
!
!
aaa authentication login
aaa authorization exec
!
!
!
!
!
aaa session-id common
!
crypto
enrollment
subject-name cn=IOS-Self-Signed-Certificate-2158060672
revocation-check none
!
!
crypto
!
!
!
!
!
!
!
!
no
no ipv6
!
!
!
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
license
!
!
username S3ed privilege 15 secret 5 $1$8wlv$dqE1hbiE4ULO3Izy48FkP0
username Fef_HO privilege 15 secret 5 $1$B2aZ$Z8JBxWWyHfCuduLtABDzG.
!
!
!
!
!
!
!
interface GigabitEthernet8
duplex auto
speed auto
!
!
!
!
line con 0
logging synchronous
login authentication
no modem enable
line aux 0
line 3
modem InOut
speed 115200
line
session-timeout 1
exec-timeout 60 0
logging synchronous
login authentication
transport input ssh
line
session-timeout 1
exec-timeout 60 0
logging synchronous
login authentication
transport input ssh
!
scheduler allocate 20000 1000
!
end
From the
The problem strangely that
The response always is "Network Error: Connection refused".
As a troubleshooting
Solved! Go to Solution.
05-04-2017 11:10 PM
Have you tried using a different SSH client?
I would also upgrade to 15.3.3M9.
05-04-2017 11:10 PM
Have you tried using a different SSH client?
I would also upgrade to 15.3.3M9.
05-04-2017 11:19 PM
the issue has been resolved after upgrading its IOS to a stable version.
Closing the ticket.
Thanks for the support.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide