TIme Schedule in a bri router

[tnpramesh]

Hi..Im Ramesh

i need to know how to put a time based access for internet with my bri router to connect to my HO and chk mails.

i need the configuration for time-range.. Like every 1 hour it will conncet for 15 mints and automatically disconnect(to save ISDN bills ).

plz help me out..

advance thanks..

Ramesh.

[jolmo]

Hi Ramesh

I think time-based ACL is what you are looking for.

Please check following example:

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a0080094089.shtml

For more info on time-based ACL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087456.html

HTH

[b.scherer]

he is correct you have to define interesting traffic with an access list. for example create your access list:

access-list 101 deny ospf any any

access-list 101 permit ip any any

under your bri interface define the dialer group which points to the access list: dialer-group 1

then in global mode add the cmd: dialer-list 1 protocol ip list 101

now the bri interface will stay up only if ip traffic is passing and ospf wont reset the idle timer