08-26-2006 01:29 AM - edited 03-03-2019 04:42 AM
Dear All:
I am trying to transfer the IOS image from Cisco 7609 router via tftp as a backup but it stops and having an error message of "timeout error".
Any Ideas.
Thanks.
08-26-2006 05:24 AM
Hi JUNKSA:
Sometimes Ios not compatible with your router , usauly because of Dram and at that moment when you want to boot your router from tftp and that ios ,you will recive timeout error.
Send your ios file name and the amount of Dram and flash that you have ,i will check it for you.
please rate it if it rights.
Thanks.
08-26-2006 05:31 AM
Hi,
I am trying to copy the IOS image wscmm-i6s-mz.123-8.xys via tftp. This image is around 10GB.
try to check.
Thanks
08-26-2006 07:17 AM
Junksa,
Try using FTP instead. TFTP will have problems with files larger than 32MB.
I personally use the following FTP server
08-28-2006 10:56 PM
Try cisco feature navigator
then copy the ios name there and check it.
I checked it by myself and i found its not valid ios are you sure its valid ios ?
Regards
Bahman Mozaffari
08-28-2006 11:41 PM
Hi Bahman,
Sorry I right the wrong IOS. Actually what I am trying to do is to copy the IOS image from Disk0: to tftp. The IOS image is s72033-adipservicesk9_wan-mz.122-18.SXE3.bin.
In the beginning everything is okay but after a few minutes he will stop and will give you the error writing tftp message.
Can you checked it for me please.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide