Token Ring support on Cisco 3745

[dyoungs]

Is the NM-1E1R2W supported on the Cisco 3745? Using IOS 12.2(13)T8 the module does not seem to be recognised.

[thisisshanky]

If you are using NM-1FE1R2W module, the supported IOS listed by Software Advisor are,

12.2(8)T1, 12.2(11)YT, 12.2(15)ZJ, 12.3(1), 12.3(2)T

[dyoungs]

Does this also apply to the NM-1E1R2W? Also we are using Call Manager v3.3 and SRST v3.0 so think we need 12.2(15)ZJ but this is a deferred release. What IOS do you suggest? Thanks

[thisisshanky]

You can also try using 12.3 T to run SRST v3.0, if you have enough ram/flash. Looking at the other post, you wont be able to use the NM that you have on the 3745. You ll need a CCO login to see that link posted in the other post.

[Georg Pauwen]

Hello,

the NM-1E1R2W is not supported on the 3745. Check the following link for compatibility info:

http://www.cisco.com/en/US/partner/products/hw/modules/ps2797/products_tech_note09186a00800ad3cc.shtml

Regards,

Georg