Although port is set as follows:set port qos 6/5,6/27 trust trust-costhe sh qos info run 6/5 suggests that the runtime trust is actually untrusted:The qos trust type is set to trust-cos.Warning: Runtime trust type set to untrusted.Do I need to set th...

We have connected an analoge phone to an FXS port and if we make a call via the QSIG card on the same router the call drops out as soon as it connects, calls from IP phones on the same router work OK.A debug give an output of CAPABILITIES MISMATCH.Th...

Is the NM-1E1R2W supported on the Cisco 3745? Using IOS 12.2(13)T8 the module does not seem to be recognised.

I have two Supervisors. One is identified as a WS-X6K-SUP2-2GE in module 1 whereas the second as WS-X6K-S2U-MSFC2 in module 1. Are these effectivelty the same supervisor but with different memory? Both have a WS-F6K-MSFC2 in Module 15. Do both these ...