10-30-2003 06:35 AM - edited 03-02-2019 11:21 AM
Is the NM-1E1R2W supported on the Cisco 3745? Using IOS 12.2(13)T8 the module does not seem to be recognised.
10-30-2003 08:34 AM
If you are using NM-1FE1R2W module, the supported IOS listed by Software Advisor are,
12.2(8)T1, 12.2(11)YT, 12.2(15)ZJ, 12.3(1), 12.3(2)T
10-30-2003 09:05 AM
Does this also apply to the NM-1E1R2W? Also we are using Call Manager v3.3 and SRST v3.0 so think we need 12.2(15)ZJ but this is a deferred release. What IOS do you suggest? Thanks
10-30-2003 05:51 PM
You can also try using 12.3 T to run SRST v3.0, if you have enough ram/flash. Looking at the other post, you wont be able to use the NM that you have on the 3745. You ll need a CCO login to see that link posted in the other post.
10-30-2003 12:11 PM
Hello,
the NM-1E1R2W is not supported on the 3745. Check the following link for compatibility info:
Regards,
Georg
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide