02-15-2002 02:18 AM - edited 03-01-2019 08:29 PM
Hi All,
I have this on my cat5000's and want to turn it off completely
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
I cant seem to clear these community strings, but want to turn off snmp completely. Please advise.
Thanks in advance
02-15-2002 02:23 AM
switch(enable)clear snmp trap all
this should do the trick
Daniel,
02-15-2002 02:28 AM
Thanks Daniel... when I do this I still have this lot in my config - does this mean that snmp is completely disabled. Thanks
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
02-15-2002 02:33 AM
If you want to delete each of these individual entries for SNMP, you need to add the command again.
switch(enable)set snmp community read-only public
SNMP read-write community string cleared
I do not know why you cannot use the clear version of this command but this should work. You will need to do this for ALL entries.
Daniel,
02-15-2002 02:50 AM
This doesnt make much difference to my config... weird huh... Its just a shame that the commands are different from the IOS based commands. no snmp-server
would be so much easier
Thanks
02-15-2002 03:03 AM
Try this
switch(enable)set snmp community read-only (no value)
where as you would normally enter public (for example), leave it blank. This, will hopefully remove it from the config.
Give it a go
02-15-2002 03:26 AM
I like it... thank you very much
02-15-2002 03:46 AM
we got there !!!!
Daniel,
02-15-2002 03:53 AM
ooohh, one other thing... what is the equivelant of the "copy run star" on the cat5000's
Thanks
02-15-2002 04:08 AM
The difference between a Catalyst 5000 and an IOS based switch is that the Catalyst 5000 has no startup config. It simply has a live, running configuration that it holds on power up. All changes that you make are live, and will be retained on power down. This means that there is no version of startup config on a Catalyst 5000, 5500, 6000 or 6500. The 12000GSR do run IOS though.
Daniel,
02-15-2002 05:48 AM
Thanks Daniel ... thats great
02-15-2002 05:43 PM
There is none... the Cat5k saves changes you make instantly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide