05-31-2012 08:00 AM - edited 03-03-2019 06:36 AM
Hello,
I am having a problem associating an AIR-LAP1142-E-K9 AP to our WLC4402 Controller (running version 7.0.230).
I have connected a console cable to the device and when it boots up it picks up an IP address. I have then entered the controller IP using the command:
# lwapp ap con ip address 10.11.13.3 (controllers IP)
APc464.1311.3d29#lwapp ap con ip address 10.11.13.3
APc464.1311.3d29#
*Mar 1 00:15:39.944: %CAPWAP-3-ERRORLOG: Go join a capwap controller
examining image...!
extracting info (292 bytes)
Image info:
Version Suffix: k9w8-.124-23c.JA4
Image Name: c1140-k9w8-mx.124-23c.JA4
Version Directory: c1140-k9w8-mx.124-23c.JA4
Ios Image Size: 4905472
Total Image Size: 5100032
Image Feature: WIRELESS LAN|LWAPP
Image Family: C1140
Wireless Switch Management Version: 7.0.230.0
Extracting files...
c1140-k9w8-mx.124-23c.JA4/ (directory) 0 (bytes)
extracting c1140-k9w8-mx.124-23c.JA4/8001.img (174932 bytes)!!
*May 31 13:54:58.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.11.13.4 peer_port: 5246
*May 31 13:54:58.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 31 13:54:58.764: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully!!!!! peer_ip: 10.11.13.4 peer_port: 5246
*May 31 13:54:58.765: %CAPWAP-5-SENDJOIN: sending Join Request to 10.11.13.4
*May 31 13:54:58.765: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1140 tar file
*May 31 13:54:58.781: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE!!!!!!!!!!
extracting c1140-k9w8-mx.124-23c.JA4/c1140-k9w8-mx.124-23c.JA4 (4724087 bytes)!!!!!!!!!!!!!!!!!!
*May 31 13:54:58.781: Loading file /c1140...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Premature end of tar file
ERROR: Problem extracting files from archive.
archive download: takes 77 seconds
On the WLC is also gives the error message:
AP Disassociated. Base Radio MAC:c4:64:13:11:3d:29
Looking on the forums, I have seen that this problem can be caused due to time differences. The Controller is set to 'GB' (regional code -E), and has the correct time zone (though I do notice this is GMT and not BST) but when the AP connects it shows the time an hour earlier than the time on the WLC GUI.
06-01-2012 07:26 AM
I've noticed in other threads about checking the country code on the AP and Controller, here are the outputs of show sysinfo on the controller and show version on the AP:
Controller
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.230.0
RTOS Version..................................... 7.0.230.0
Bootloader Version............................... 7.0.230.0
Emergency Image Version.......................... 7.0.230.0
Build Type....................................... DATA + WPS
System Name...................................... CSOCER_WLC2
System Location.................................. CSOCER
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 10.11.13.3
System Up Time................................... 2 days 4 hrs 28 mins 21 secs
System Timezone Location......................... (GMT) London, Lisbon, Dublin, Edinburgh
Configured Country............................... GB - United Kingdom
Operating Environment............................ Commercial (0 to 40 C)
AP
APc464.1311.3d29>sh version
Cisco IOS Software, C1140 Software (C1140-RCVK9W8-M), Version 12.4(21a)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 08-Jun-09 16:28 by prod_rel_team
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
APc464.1311.3d29 uptime is 2 minutes
System returned to ROM by watchdog timer expired
System image file is "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco AIR-LAP1142N-E-K9 (PowerPC405ex) processor (revision B0) with 98294K/32768K bytes of memory.
Processor board ID FCZ1552Z5GP
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from watchdog timer expired
LWAPP image version 3.0.51.0
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: C4:64:13:11:3D:29
Part Number : 73-12836-04
PCA Assembly Number : 800-33767-04
PCA Revision Number : A0
PCB Serial Number : FOC15497RYY
Top Assembly Part Number : 800-33775-03
Top Assembly Serial Number : FCZ1552Z5GP
Top Revision Number : A0
Product/Model Number : AIR-LAP1142N-E-K9
Configuration register is 0xF
06-11-2012 01:44 AM
has anyone run into this problem before, I would appriciate it if anyone knows how to fix the problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide