cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
377
Views
0
Helpful
2
Replies

Understand logging

victorft10
Beginner
Beginner

Hi, i want to know how identify what type of problem have a switch, router when i display show logging. Or if exist a list of errors that explain the errors. For example:

*30w5d: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an infinite loop

on MAC Address 0100.5e7f.fffe

*Oct 2 17:24:47: %SNMP-CLUSTER_MEMBER_1-3-CPUHOG: Processing GetNext of dot1dTp

FdbEntry.1.0.224.41.133.127.9

*Oct 2 17:24:47: %SYS-CLUSTER_MEMBER_1-3-CPUHOG: Task ran for 5620 msec (14204/

255), process = IP SNMP, PC = 801D1C9C.

-Traceback= 801D1CA4 80076610

I don´t understand this type of errors.

Thanks for help me.

1 Accepted Solution

Accepted Solutions

The error message you pasted is a CPUHOG error message. Basically the SNMP process was using up too much CPU processor time. Find out what those MIBs do and why the collection of that info could

hold up the CPU.

What Causes %SYS-3-CPUHOG Messages?

URL: http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6ac4.shtml

View solution in original post

2 Replies 2

skarundi
Enthusiast
Enthusiast

Cisco.com has an error message decoder tool.

It is located at

URL: http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi

This should help for most messages.

The error message you pasted is a CPUHOG error message. Basically the SNMP process was using up too much CPU processor time. Find out what those MIBs do and why the collection of that info could

hold up the CPU.

What Causes %SYS-3-CPUHOG Messages?

URL: http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6ac4.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers