01-21-2004 08:15 AM - edited 03-02-2019 01:03 PM
Hi, i want to know how identify what type of problem have a switch, router when i display show logging. Or if exist a list of errors that explain the errors. For example:
*30w5d: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an infinite loop
on MAC Address 0100.5e7f.fffe
*Oct 2 17:24:47: %SNMP-CLUSTER_MEMBER_1-3-CPUHOG: Processing GetNext of dot1dTp
FdbEntry.1.0.224.41.133.127.9
*Oct 2 17:24:47: %SYS-CLUSTER_MEMBER_1-3-CPUHOG: Task ran for 5620 msec (14204/
255), process = IP SNMP, PC = 801D1C9C.
-Traceback= 801D1CA4 80076610
I don´t understand this type of errors.
Thanks for help me.
Solved! Go to Solution.
01-21-2004 08:27 AM
The error message you pasted is a CPUHOG error message. Basically the SNMP process was using up too much CPU processor time. Find out what those MIBs do and why the collection of that info could
hold up the CPU.
What Causes %SYS-3-CPUHOG Messages?
URL: http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6ac4.shtml
01-21-2004 08:23 AM
Cisco.com has an error message decoder tool.
It is located at
URL: http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi
This should help for most messages.
01-21-2004 08:27 AM
The error message you pasted is a CPUHOG error message. Basically the SNMP process was using up too much CPU processor time. Find out what those MIBs do and why the collection of that info could
hold up the CPU.
What Causes %SYS-3-CPUHOG Messages?
URL: http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6ac4.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: