cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
361
Views
0
Helpful
1
Replies

UTC: %FIB-4-RPPREFIXINCONST2 error message

mih911
Level 1
Level 1

I'm getting following message on CISCO 75000 router. Any one can help me to resolving issue.

UTC: %FIB-4-RPPREFIXINCONST2: RP missing prefix for 192.168.31.16/30 in FIB table Default-table (present in routing table)

1 Reply 1

kmuthukamu
Level 1
Level 1

Hi,

Looks like you have problem with the cef table entries.

The error message %FIB-4-RPPREFIXINCONST2 conveys , that a passive consistency checker discovered a prefix in the routing table that is not present in the CEF forwarding table

on the RP. This may be a transient condition.

If the same prefix gives repeated errors, check the prefix in CEF and the routing table. Attempt to disable

and enable CEF if the prefix is missing.

Please refer the flg. link for CEF troubleshooting http://www.cisco.com/warp/public/63/cef_error_msgs_7603.shtml#rpprefix

Hope this helps...

Review Cisco Networking for a $25 gift card