VIP2 crash

[sunjs]

When vip2-50 with PA1-FE found VIP4-80 with PA2-FE ,then VIP2-50 reset ,

It seems that 1FE and 2FE could not present in same RSP2.

why?

[Frederic Vanderbecq]

It is difficult to say what happened like that. Can you forward us the output of show version and show diag where is the slot holding the VIP which crashed.

[sunjs]

Slot 1:

Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

VIP2 controller, HW rev 2.4, board revision D0

Serial number: 06376818 Part number: 73-1684-03

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 15 02 04 00 61 4D 72 49 06 94 03 00 00 00 00

0x30: 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4 Insertion time: 0x14C8 (1w1d ago)

Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM

PA Bay 0 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL

EEPROM format version 1

HW rev 1.0, Board revision A0

Serial number: 06605101 Part number: 73-1688-04

PA Bay 1 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL

EEPROM format version 1

HW rev 1.0, Board revision A0

Serial number: 06603407 Part number: 73-1688-04