03-09-2004 06:36 AM - last edited on 03-25-2019 02:50 PM by ciscomoderator
Wondering if a vlan can be in its (protocol is down) status and if so, why, since it is just a virtual interface.
no shut doesn't work on this, any other idea other than deleting and creatin the vlan?
03-09-2004 07:04 AM
Hi,
are you talking about "VLAN x" or "int VLAN x"?
"int VLAN x" can be down when there is no physical interface assigned to the associated "VLAN x".
Regards,
Milan
03-10-2004 09:25 AM
Also, you can only have 1 active VLAN on each layer 2 switch at a time. If you try and bring up another one, it shuts down the active one on you...
03-10-2004 08:34 AM
This article may help you. Looks like a physical port that is in the same vlan as the vlan interface must have link for the vlan interface to be in up/up state.
Understanding and Troubleshooting the Autostate Feature in Catalyst Switches
http://www.cisco.com/en/US/customer/products/hw/switches/ps700/products_tech_note09186a0080160b14.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
