10-04-2022 05:35 AM
Hi all,
I have the following 2 issues, and i would like to know if they are related or not.
1.-This is for all the trunks ports, This is connected to wifi devices.
Sep 28 12:34:10.041: %SW_MATM-4-MACFLAP_NOTIF: Host 08d2.3e08.e0e4 in vlan 667 is flapping between port Gi2/0/45 and port Gi3/0/1
2.- Will the topology changes will be inside the normal values or I will be facing loops in Spanning tree?
VLAN0006 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 307 last change occurred 13:48:43 ago
from GigabitEthernet3/0/1
VLAN0666 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 232 last change occurred 00:05:26 ago
from GigabitEthernet3/0/46
VLAN0667 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 232 last change occurred 00:05:26 ago
from GigabitEthernet3/0/46
VLAN0668 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 232 last change occurred 00:05:26 ago
from GigabitEthernet3/0/46
10-09-2022 12:35 PM
Hello,
what is the root device for the respective Vlans ? Post a schematic drawing of your topology showing how all devices are connected..
10-10-2022 05:33 PM
This will be the core switch and will be the Root for all the vlans.
10-09-2022 12:43 PM
wifi are you use any mesh ?
10-10-2022 05:33 PM
I would have to check that. thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide