Way to test Point to Point T1 with 2 1720 Routers?

[kawin]

Greetings,

We have two 1720 cisco routers. I plan to establish point to point T-1 between them -- one router on my lan, the other at a remote site.

1) Does anyone have a simple config I may look at to establish a point to point connection between these routers?

2) Is there a way to test the connectivity between them with a pseudo T-1 connection? I want to make sure it works before shipping the other router to the remote site.

Thanks!

K

[o.hassairi]

HERE a simple config using PPP

interface serial 0

ip address 193.1.1.1 255.255.255.0

encapsulation PPP

no shut

!

interface fastethernet 0

ip address 192.168.1.1 255.255.255.0

no shut

!

ip route 192.168.2.0 255.255.255.0 193.1.1.2

!

make the symetric thing in the other router.

to test the connectivity with a pseudo T1, u need DCE cable in one router.

then in this router add the command (clock rate xxxxxx) under the serial interface.

use ping to ping from lan to lan

[kawin]

Thanx for your help!

Just wondering, for point to point T1 connectivity to 2 routers, is it necessary to use IP's? Or could you use ip unnumbered?

Thanks,

K