11-17-2001 01:12 PM - edited 03-01-2019 07:26 PM
Hi all,
I have an Cisco ISDN 801 which calls up fine to the internet when i go in my browser but i don't get any data from the internet. IE says page not found. The usual error when you don't have connection. I hope somebody can tell me what's wrong in my configuration. My host does have the gateway ip from the router so that shouldn't be a problem.
Any suggestions are more than welcome. I've used alot of nights trying to figure what's wrong.
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Cisco801
!
enable password 7 05060F072045
!
!
!
!
!
ip subnet-zero
!
ip dhcp pool 1
network 192.168.0.0 255.255.255.0
default-router 192.168.0.2
dns-server 10.116.231.152 10.116.231.123
!
no ip domain-lookup
isdn switch-type basic-net3
!
!
process-max-time 200
!
interface Ethernet0
description connected to EthernetLAN
ip address 192.168.0.2 255.255.255.0
no ip directed-broadcast
ip nat inside
!
interface BRI0
description connected to Internet
no ip address
no ip directed-broadcast
ip nat outside
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
!
interface Dialer1
description connected to Internet
ip address negotiated
no ip directed-broadcast
ip nat outside
encapsulation ppp
no ip split-horizon
dialer in-band
dialer string 80900550
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname BK045D1\gmarinescu
ppp chap password 7 020B014908030B245F18
!
router rip
version 2
passive-interface Dialer1
network 192.168.0.0
no auto-summary
!
ip nat inside source list 100 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
dialer-list 1 protocol ip permit
snmp-server engineID local 00000009020000B0C28912B7
!
line con 0
exec-timeout 0 0
password 7 141A1B030D0D
login
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
password 7 00091A0E0552
login
!
end
11-17-2001 03:34 PM
I would change:
ip nat inside source list 100 interface Dialer1 overload
to:
ip nat inside source list 1 interface Dialer1 overload
and add:
access-list 1 permit 192.168.0.0 0.0.255.255
Mick.
11-17-2001 04:29 PM
Wow Thanks alot. It now works perfectly. I don't even know how to thank you. You've just saved me couple of weeks on figuring out what's wrong.
Another thing is. Do you know how i activate the second ISDN line so the router always will call with to lines ? Anyway this is just an extra thing i ask for. I think i can figure it out but since i see you have alot experience with cisco routers it should be easy for you to answer. That will save me some reading.
Thanks alot again.
Best Regards
Mihai Marinescu
Denmark
11-17-2001 05:02 PM
I don't want to give you *all* the answers! ;)
Check out "ppp multilink"
Mick.
11-17-2001 05:16 PM
Ok thanx anyway :o) you've already been a big help.
Best Regards
Mihai Marinescu
11-18-2001 01:51 PM
also check out "dialer load-threshold"
and change your password... even though your config displays it in an encrypted form it is still way to easy to crack... some hints on what not to make you password ... 1, 5 or less digits 2, none alfa-num 3, a "name".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide