WIFI 4402 CONTROLLER AND 1041N

[nhedhili]

Hi alI ,

I have a customer that already has 1121G Ap  autonomous deployed, I will convert them  to Lightwight ones and install a 4402 controller and will add other 1041N ap THAT will be controlled by the controller in teh same time.

Does any one tested 4402 controller with 1041n and 1121G together ?   did some one encountred any problems with a such scenario.

Are there any tricky points that we should care about or for which we should pay attention befre we begin installation.

Thanks and Regards

[Leo Laohoo]

Does any one tested 4402 controller with 1041n and 1121G together ?   did some one encountred any problems with a such scenario.

I haven't tried both but for 1040 APs to work you'll need to upgrade the firmware to 7.0.98.0 and later.  Inter-operation of both is no issue.  Just be aware that there are some stuffs the 1040 will do and the 1120 won't such as 802.11N.