cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
0
Helpful
0
Replies

WSAv S100v proxy not working even though correct setup

ZoellerG
Level 1
Level 1

Hi everyone,

i'm once again asking for help in my GNS3 LAB topology.

I'm running a wsa proxy in a different vlan (190) which has a 10.1.190.0/30 mask, i have set up licensing and web proxy for via Port 80, 3128 and set it up in my test client. However the connection always gets refused it's either response took too long/connection reset or proxy connection failed.

I have already looked at a netstat and the wsa is listening for 3128 and 80 traffic so everythings alright there however theres a strange line inside the default proxy logs.


Wed Nov 1 00:50:21 2023 Info: DISK_MGR : - : [34411] initialization process #0 exiting normally
Wed Nov 1 00:50:23 2023 Info: PROXY : - : [34411] FastRPCServerSocketAccept(SOPHOSSERVER): accepted: path=/tmp/sophos_cb_fastrpc.sock clientFd=255 listenFd=26
Wed Nov 1 00:50:23 2023 Info: PROXY : - : [34411] FastRPCServerSocketAccept(AVCSERVER): accepted: path=/tmp/avc_cb_fastrpc.sock clientFd=256 listenFd=27
Wed Nov 1 00:50:23 2023 Info: PROXY : - : [34411] FastRPCServerSocketAccept(WEBROOTSERVER): accepted: path=/tmp/webroot_cb_fastrpc.sock clientFd=257 listenFd=24
Wed Nov 1 00:50:25 2023 Info: PROXY : - : [34411] FastRPCServerSocketAccept(FIRESTONESERVER): accepted: path=/tmp/firestone_cb_fastrpc.sock clientFd=261 listenFd=25
Wed Nov 1 00:50:27 2023 Warning: CONFIG : - : [34411] Attempt to load magic file ../etc/magic_v8 failed
Wed Nov 1 00:50:27 2023 Warning: CONFIG : - : [34411] Attempt to load magic file ../etc/magic_v8_previous failed
Wed Nov 1 00:50:27 2023 Warning: CONFIG : - : [34411] Attempt to load magic file ../etc/magic_v8_default failed
Wed Nov 1 00:50:27 2023 Critical: PROXY : - : [34411] Can't load magic database. Proxy will reload.
Wed Nov 1 00:50:27 2023 Info: PROXY : - : [34411] Process[34411] is about to exit()

ZoellerG_0-1698796629557.png

ZoellerG_1-1698796639997.png

My guess is that this is the reason why nothings working, des anyone have an Idea?

The version my wsa is running is Async 11.8 S100v

Greetings

George

 

Georg György Zoeller
0 Replies 0

Review Cisco Networking for a $25 gift card