cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
846
Views
0
Helpful
1
Replies

ASR 920 PTP debugging

Energia
Level 1
Level 1

I do have a ASR 920 that is stuck in Freq_locked state, (it does not reach Phase_aligned), do anyone know of any useful debug commands that is able to show why it does not reach Phase_aligned?

1 Reply 1

Hello,

 

try:

 

debug network-clock errors

debug network-clock event

debug network-clock sm

 

Which IOS version are you running on your ASR920 ? Check if the bug below applies:

 

HC+BC sending packets to downstream when it is in FREQ_LOCKED.
CSCur29193
Description
Symptom:
When a Hybrid-Boundary Clock (HC-BC) node loses the phase and comes to frequency lock, it still sends PTP packets to its slaves; Which is not correct. A HC-BC node should send packets to its slave only if it itself is in PA state.

In this bug the problem is that even if HC-BC node loses phase, it still drives the slaves and as slaves receive PTP packets they remain in PA, which is not correct as the master (HC-BC) is not in PA itself.

Conditions:
Hybrid Boundary clock (HC-BC) PTP configuration

 


Known Affected Releases: (1)
15.4(3)

 

Known Fixed Releases: (6)
15.5(1.15)S
15.5(1)SN1
15.5(1)S1
15.5(1)S0.4
15.4(3)S2
15.4(3)S1.4

Review Cisco Networking for a $25 gift card