cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
722
Views
0
Helpful
2
Replies
SilentHunter124
Beginner

Cisco config register help

 

Hi everybody,

I have a little problem understanding this article: http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/50421-config-register-use.html

If I want, the Router, to boot the IOS from for example tftp://192.168.0.1/NAME.xyz AND the Router should not load any configuration file, what do I have to type?

And... How does this work, because the router does not have a configured IP Interface, how can it fetch this file from tftp?

Thanks for your help.

2 REPLIES 2
Leo Laohoo
VIP Community Legend

Ahhhhh ... TFTP boot.  I've never seen this work, frankly.

Obviously there are two different ways doing this.

Via Config reg and netboot (default filenames)

And this howto: https://supportforums.cisco.com/blog/150396/booting-cisco-router-tftp-server